Altronix NetWaySP1BTWPX Посібник з монтажу - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з монтажу для Конвертер мультимедіа Altronix NetWaySP1BTWPX. Altronix NetWaySP1BTWPX 12 сторінок. 802.3bt media converter/injector with integral power
Також для Altronix NetWaySP1BTWPX: Посібник з монтажу (12 сторінок)
Друкувати сторінку
Fig. 3
Input Voltage
Selection Switch
115VAC
Input/Data Connections:
1 . Connect structured cable from port marked [Data Port] on NetWaySP1BT to a PoE midspan/endspan
(Fig. 4, pg. 5) .
2 . Connect fiber optic cable to a fiber SFP module . Connect the module to the port marked [SFP] on the
NetWaySP1BT . Connect the other end of fiber cable to an SFP module of a remote device .
SFP LED will illuminate indicating data connection (Fig. 4, pg. 5) .
3 . Using 4-pair CAT5e or higher cable connect PoE load device to be powered to the port marked
[802 .3bt Output] on NetWaySP1BT . After authentication and classification have been established,
[PoE Signal] LED will illuminate indicating PoE presence .
Fig. 4
IEEE 802.3af, 802.3at and 802.3bt
compliant port rated up to 90W max
Yellow LED
10/100 Mbps
48VDC to 56VDC
NetWaySP1BT Series
115VAC
230VAC
230VAC
Fig. 3a
L
Ground
48-56VDC
– Input +
-- +
Input
PoE LED indicates PoE present
Ground
To Stand-by
Batteries
G
N
802.3bt
PoE
Data
Output
Signal
Port
NetWaySP1BT
802.3bt Converter/Injector
Input:
48–56VDC
Output: IEEE 802.3bt (90W)
48-56VDC
802.3bt
PoE
Data
-- Input +
Output
Signal
Port
Green LED 1000 Mbps
Fiber
SFP
Signal
SFP LED Indicates
data connection
Fiber
SFP
Signal
Ethernet Data Port
One (1) Gb SFP port
for Fiber
- 5 -