3LeggedThing EQUINOX PRO Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Аксесуари для фотоапаратів 3LeggedThing EQUINOX PRO. 3LeggedThing EQUINOX PRO 12 сторінок.

Друкувати сторінку

*Not all 3LT AirHeds have the Pano Clamp or Pano Lock.

AirHeds and Release Plates

There are two clamp types - Pano & Switch. The pano

clamp has an orange locking knob (4) for releasing the

Plate, and a black knob (3) which locks and unlocks the

panning function.

NEVER undo any of the knobs without holding your camera.

The AirHed Switch is operated by sliding the switch (a) and

opening the lever (b) by 180 degrees. To lock, pull the lever

back to it's original position.

To change the orientation from right to left handed and

vice versa, move the lever (b) into a 90 degree position.

Remove the plate and push in points (c) and (d), in doing

this you will release the switch enabling you to rotate and

change its orientation.

Prior to its first use, the Switch Clamp may need to go

through an easy setup process. This is because we want

our products to be as cross compatible as they can be,

in this case, being suitable for whatever release plate you

choose. Simply open the clamp (as previously shown)

insert your plate of choice in, then close the clamp using

the switch. Now with the provided Hex Key tighten the

clamp so your plate is secure.

ANATOMY OF AN AIRHED

QR3P (Release) Plate

Pano Lock*

Camera Screw

Casing

Ball Control

IMPORTANT

The QR3P Release Plate included in all 3 Legged

Thing Tripod Kits does not have security bolts fitted,

as bolts are incompatible with the Peak Design

Capture System.

It is important that you tighten your release plate

onto the clamp completely and check, before

use. We recommend placing the orange knob or

switch handle, UNDER the lens, where it cannot be

accidentally released.

We have engineered the security cutouts into

each of our AirHeds, and an optional QR6 Release

Plate with security bolts is available to purchase

separately. The QR6 Plate is not compatible with the

Peak Design Capture system.

Pano-Clamp*

Plate Lock

Pan Knob (behind head)

Pan Base