Artison Sketch LCR DualMono MK 2 Посібник з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу для Спікери Artison Sketch LCR DualMono MK 2. Artison Sketch LCR DualMono MK 2 4 сторінки.
Також для Artison Sketch LCR DualMono MK 2: Посібник з монтажу (16 сторінок), Короткий довідник (4 сторінок), Короткий довідник (4 сторінок)
Друкувати сторінку
Fine Tune Speakers
To fine tune the A/V Receiver/Processor, set using the following:
–
Set Speakers to SMALL
–
Set Crossover Frequencies
•
Dual Center = 80 Hz
•
Left and Right = 80 Hz
–
Crossover Slope = 18 dB/octave or greater.
NOTE: These settings are intended to be a starting point for testing.
Every individual will experience audio differently so what
sounds good to the installer may not sound good to the user.
Mount Grilles
1. Position the tabs on the grille so they line up with the four slots in
each corner on the face of the speaker enclosure.
2. Apply with an inward pressure on each of the corners until grille is
set into position.
HELPFUL! The slots in the speakers are roughly ¼ inch longer than
the table in the grilles. When installing, adjust the grille up or
down to align with the TV before pressing into position.
Custom Grilles
For customers who have not yet purchased speaker grilles, Savant
offers a free online tool to assist with designing and ordering custom
grilles to suit the needs of individual installations. To access the Grille
Designer tool, visit www.savant.com, select the Store tab, then choose
the Grille Designer from the Tools dropdown menu.
Masterpiece LCR Dual Center MK2 Installation Guide | 009-1625-02
Copyright 2020 Savant Systems, Inc | 200821
Dimensions
29.6 in.
(75.18 cm)
2.5 in.
(6.35 cm)
NOTE: Grilles will add .3 in (.76 cm) to the overall depth of the speaker
assembly.
www.savant.com/artisonspeakers
4
of
4
6.20 in.
(15.75 cm)
Includes
Bracket
2.0 in.
(5.08 cm)
13.625 in.
(34.61 cm)
30.6 in.
(77.72 cm)
45 Perseverance Way, Hyannis, MA 02601
| 508.683.2500