Artison RCC1000-SA Посібник з монтажу - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу для Підсилювач Artison RCC1000-SA. Artison RCC1000-SA 12 сторінок.

Thank you for choosing Artison's RCC 1000 Subwoofer Amplifier. We are pleased that you

have selected our high-performance audio products.

INTRODUCTION

The RCC 1000 Subwoofer Amplifier was designed to ONLY be used with the RCC In-Wall Subwoofers,

RCC320 and RCC640 Modules. The RCC1000-SA is a powerful monoblock Class D amplifier with

advanced DSP software. The compact one rack height chassis can be installed into either cabinetry,

on an equipment shelf, or it can be rack-mounted into a standard 19" Equipment Rack. In any

installation be sure to provide adequate ventilation above and below the amplifier.

RACK-MOUNT INSTALLATION OF THE RCC1000-SA

Remove the amplifier's four feet from the bottom of the chassis.

2. Attach the included rack-mount ears to the front sides of the RCC1000-SA. NOTE: Be sure to use

the included hardware. There are 4 forward mounting screws per rack ear.

3. Mount into the 19" equipment rack, the amplifier will occupy 1 RU.

RCC1000-SA FRONT PANEL CONTROLS

1. STANDBY – This button will toggle between Standby Mode (Red LED) and ON (Blue LED).

2. LED – The LED in the GAIN control will indicate the following:

RED – STANDBY

BLUE – ON & MUSIC EQ. The MUSIC EQ setting provides a full range of deep musical bass to

enhance the listening experience. Subsonic Filter is 20 Hz.

RED & BLUE – ON & MOVIE EQ. The MOVIE EQ setting adds more volume and upper bass to

help recreate the true movie theater experience. Subsonic Filter is 35 Hz.