Artiste ABH 102 Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Гарнітури Artiste ABH 102. Artiste ABH 102 4 сторінки. Bluetooth
Друкувати сторінкуCharging
1.When it is charging , the green lights.
2.When the charging is completed, the green indicator light
is extinguished, charging adapter/wire can be removed.
3.If the battery is completely run out , it may take several
minutes for charging light to indicate the state of charge;
When the charging cable is not in use, please disconnect it
with the device. Excessive charging will shorten battery life.
4.If you have a fully charged battery without using ,
the battery will discharge by itself after a period of time;
5.The headset can be used when charging.
Note:
The headset is built with non removable and rechargeable battery inside, do not remove the battery or
so as not to damage the headset .
When charging for first time ,it should be charged for more than 12 hours and less than 24 hours, which
can activate the battery in best status. After that, charging only needs 2-3 hours (do not charge more
than 24 hours, or it will damage the battery life)
Specifications
Bluetooth : V2.1 + EDR
Transmission Mode: GFSK
Operating voltage: 3.7 V
Signal-to-noise ratio: > 80 dB
Channel separation: >30 dB
Frequency response: (-3dB) 35Hz-18KHz
Operating Time: 8 hours
Standby time: 10 hours
Out Power: 8mW
Distortion: <1%
Safety
In order to obtain the best sound effects, please pay attention to distinguish between left and right side
USB Charging
of the headband.
Do not disassemble the hardware; use dry and soft cotton to clean the headset etc.
We recommend you take the following preventive measures to prevent hearing loss :
If the volume is too large, may cause hearing loss.
Adjust the appropriate volume from the minimum, increase slowly until the sound is comfortable, clear
and without distortion. If in a comfortable volume, you have tinnitus or discomfort , please turn down the
volume or stop to listen and check the hearing status.
Warning: Wireless transmission will produce electromagnetic signal, please pay attention to use
the headphone when you have cardiacpacemaker or related auxiliary instrument.
Troubles
A: Not successfully matched :
1. Confirm the connection device with Bluetooth function has been opened and work;
2. Check whether the headset battery power is insufficient;
3. Do not open the too many Bluetooth headsets or Bluetooth devices at the same time, to prevent
interference;
4. Confirm the headset is in pairing state and input Bluetooth headset the password correctly;
5. If the above method still can not solve this problem, reset the headset, pair it by description
B.Cannot listen to music or call by headset:
1. Increase the headset volume;
2. Confirmed the device has been successfully connected
5
6