Altusen KM0530 Посібник із швидкого старту

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Перемикач Altusen KM0530. Altusen KM0530 2 сторінки. Console 32-port matrix kvm switch

Друкувати сторінку

Online Registration

International:

• http://support.aten.com

North America:

KM0032/KM0532/KM0932 0/5/9 Console 32-Port

• http://www.aten-usa.com/product_registration

Technical Phone Support

Matrix KVM Switch Quick Start Guide

International:

• 886-2-8692-6959

China:

• 86-10-5255-0110

Japan:

International Co., Ltd. www.aten.com

• 81-3-5615-5811

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd.

Korea:

• 82-2-467-6789

North America:

This product is RoHS compliant

PAPE-1215-200G Printing Date: 06/2012

• 1-888-999-ATEN Ext: 4988

United Kingdom:

• 44-8-4481-58923

Package Contents

The KM0032 / KM0532 / KM0932 package consists of:

1 KM0032, KM0532, or KM0932

2 Power Cords

1 Daisy Chain Cable (KM0032 only)

1 Mounting Kit

1 Foot Pad Set (4 pcs.)

1 User Instructions

2-1

Requirements

Console

The following hardware components are required for each KVM console:

• A VGA, SVGA, or multisync monitor capable of displaying the highest resolution provided by any

computer on the installation

• Keyboard and mouse (PS/2 or USB)

• Console modules are required to connect KVM consoles to the KM0532 /KM0932. They provide

flexibility for your installation by allowing PS/2 and USB interfaces to be mixed and matched at

the KVM console side. The console modules currently available are listed in the table below.

Contact your dealer for details or refer to the documentation included with your console module.

Function

Model Number

PS/2-USB Console Module

KA7230

Virtual Media PS/2-USB Console Module

KA7240

Computers

The following hardware components are required for each computer that connects to the switch:

• A VGA, SVGA, or multisync video graphics card with an HDB-15 port; or, for legacy Sun

systems, a Sun 13W3 video port

• PS/2 mouse and keyboard ports (6-pin Mini-DIN), or at least one USB port; or, for legacy Sun

systems, a Sun style keyboard port (8-pin Mini-DIN)

Cables

KVM Adapter Cables

KVM adapter cables connect multiplatform computers (PS/2, USB, Sun, Mac, and serial) and certain

cascaded KVM switches to the KM0032 / KM0532 / KM0932. The KVM adapter cables currently

available are listed in the table below. Contact your dealer for details.

Function

Model Number

For PS/2 computers

KA7120, KA9120,

For Sun legacy computers

KA7130, KA9130

For serial devices

KA7140, KA9140

For USB computers (including Sun and Mac)

KA7170, KA9170

For USB computers – Virtual Media and Audio

KA7176

support

Connecting Cables

Other cables that are used to connect up the KM0032 / KM0532 / KM0932 installation include the

following:

Function

Type

Connecting Console Modules or KVM

Cat 5 Ethernet cable

Adapter Cable to the switch

Daisy Chaining switches

LIN5-68H1-H11G (45 cm)

2-2

Requirements

Operating Systems

Supported operating systems are shown in the table, below:

Version

Windows

2000 and higher

RedHat

7.1 and higher

Fedora

Core 2 and higher

Linux

SuSE

9.0 and higher

Mandriva (Mandrake)

9.0 and higher

AIX

4.3 and higher

UNIX

FreeBSD

4.2 and higher

Sun

Solaris 8 and higher

Novell

Netware

5.0 and higher

Mac

OS 9 and higher

Hardware Review (Front View)

KM0532/KM0932

1. Power LED

KM0532

2. KVM Port LEDs

3. Console (User) Port LEDs

4. LAN LED

5. Reset Switch

6. Cover Latch

7. Firmware Upgrade

Recovery Switch

8. Console (User) Port

KM0932

KM0032

1. Power LED

2. Port LEDs

3. Station ID LED

4. Reset Switch

5. Cover Latch

6. Firmware Upgrade

KM0032

Recovery Switch

Hardware Review (Rear View)

KM0532/KM0932

1. Power Sockets

2. Power Switches

KM0532

3. PON Port

4. Console Ports

5. KVM Ports

6. Grounding Terminal

7. CHAIN OUT Port

8. LAN Port

KM0932

KM0032

1. Power Sockets

2. Power Switches

3. KVM Ports

4. Daisy Chain Ports

5. LAN Port

KM0032

6. Grounding Terminal

5-1

Rack Mounting

The KM0032/KM0532/KM0932 can be mounted in a 19" (1U) rack. The mounting brackets can

screw into either the front or the back of the unit so that it can attach to the front or the back of the

rack.

1. Remove the two screws at the front or

the rear.

Phillips head hex

M3 x 6

Phillips head hex

M3 x 6

2. Screw the two mounting brackets into

the sides of the unit at the front or the

Phillips head hex

rear.

M3 x 8

Phillips head hex

M3 x 8

3. Slide the unit into the front or rear of

the rack and secure it to the rack.

5-2

Grounding

To prevent damage to your installation it is important that all devices are properly grounded.

Use a grounding wire to ground the KM0032 / KM0532 / KM0932 by connecting one end of the

wire to the switch's grounding terminal, and the other end of the wire to a suitable grounded object.

5-3

Single Level Installation

In a single level installation, there are no additional KVM switches cascaded or daisy chained

down from the first level KVM switch. To set up a single level installation, refer to the diagram

(the numbers in the diagrams correspond to the numbered steps) and do the following:

1. Connect the KVM console.

Plug your keyboard, mouse, and monitor into their respective ports on the console module. Each

console port is marked with an identifying icon

2. Connect the console module to the KM0532 / KM0932.

Use Cat 5e/6 cable to connect the LINE IN 1 or LINE IN 2 port of the console module to one of

the Console (User) ports on the KM0532 / KM0932's rear panel.

(Repeat steps 1 and 2 for all KVM consoles that you wish to connect. Up to 5 (KM0532), or 9

(KM0932) KVM consoles may be connected in this fashion (1 port on the front panel, plus 4 or

8 ports on the rear panel).

Note: The distance between any console module and any KVM adapter cable must not exceed

300 m (1000').

5-3

Single Level Installation

3. Connect the KVM adapter cable to the computer.

Using a KVM adapter cable that is appropriate for the computer you are installing, plug the

adapter cable's connectors into their respective ports on the computer

4. Connect the KVM adapter cable to the KM0532 / KM0932.

Use Cat 5e/6 cable to connect the KVM adapter cable to any available KVM port on the KM0532

/ KM0932. (Repeat steps 3 and 4 for all computers that you wish to connect. Up to 32 computers

may be connected in this fashion.)

5. Plug a cable from the LAN or WAN into the KM0532 or KM0932's LAN port.

6. Connect a PON unit (Optional)

Use Cat 5e/6 cable to connect the KM0532 or KM0932's PON port to an SA0142 Adapter.

Connect the Adapter to the PON IN port of a PN0108 Power Over the Net™ unit.

7. Ground the switch.

Use the grounding wire supplied with this package to ground the unit by connecting one end of

the wire to the grounding terminal, and the other end of the wire to a suitable grounded object.

Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from surges or

static electricity.

8. Plug the power cords supplied with this package into the KM0532 /KM0932's Power Socket, and

then into an AC power source. Turn on the power to the KM0532 / KM0932.

9. Connect the console module's power adapter to the console module and to an AC power source.

10. Turn on the power to the computers.

KA7230/KA7240

Console Module

Adapter Cable

PN0108

5-4

Cascading

KM0532 and KM0932 switches support a 3 level cascade for KM0532 / KM0932 units. They

support a 1 level cascade for other compatible model KVM switches. In other words, slave

switches cannot be cascaded from non-KM0532 / KM0932 switches

Cascading KM0532 / KM0932 Switches

Note: The firmware version of all cascaded KM0532 / KM0932s should match the firmware

version of the first level KM0532 / KM0932.

To cascade KM0532 / KM0932 switches refer to the installation diagram and do the following:

1. Connect the KVM console to the console module.

2. Connect the console module to the KM0532 / KM0932.

Note: The distance between any console module and any KVM adapter cable, or between the

first level and final level KVM switch, may not exceed 300 m (1000').

3. Use Cat 5e/6 cable to connect any KVM port on the parent switch to any of the Console ports on

the child switch.

Note: 1. The number of KVM consoles connected to the first level switch that can

simultaneously access the cascaded switch is limited by the number of Console port

connections between the parent and child switches.

2. The distance between any console module and any KVM adapter cable must not exceed

300 m (1000').

4. Repeat step 3 for each second level KVM switch that you wish to cascade.

5. Follow the instructions given for single level installation to connect computers, power cords,

etc..

Note: It is not necessary to connect cascaded switches to the network. Remote (over the

network) administration of cascaded switches are managed through the of the first level

switch.

6. To cascade third level KVM switches, follow the instructions in steps 3, 4, and 5 when cascading

them from the second level KVM switches.

7. Power on the first level KM0532 / KM0932.

8. Wait one minute, and then power on each second level KM0532 /KM0932.

9. Wait one minute, and then power on each third level KM0532 / KM0932.

10. Plug the power adapters supplied with the console modules into an appropriate AC power

source, and then plug the power adapter cables into the power jacks on the rear of the console

modules.

11. Turn on the power to all the computers.