Alula RE657WF Посібник - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник для Сенсорна панель Alula RE657WF. Alula RE657WF 12 сторінок. Flat mount touchpad
Також для Alula RE657WF: Посібник (12 сторінок)
Друкувати сторінкуPower Converter
Splice
Power Transformer
4. Pull wire from touchpad to AC outlet. If replacing an existing touchpad, existing wiring can
be used; however, new touchpad must be powered by supplied 12V DC power transformer.
Do not power from existing panel.
5. Connect wire to provided power transformer.
NOTE: Power Converter must be powered by supplied 12V DC Power Transformer. Do not
power from existing panel or other power supply.
6. Splice power converter wires to wires pulled from AC outlet.
7. Ensure correct polarity. Red wire must connect to +12V of power transformer.
8. Plug USB connector into the display.
9. Place power converter and excess wire inside the wall.
10. Snap the display into the back plastic (ensure camera is on the left side).
11. Align the front cover and snap into place.
12. Plug in the Power Transformer and ensure the display lights up. If display does not light up,
unplug power transformer and verify wire polarity.
Display
MAXIMUM WIRE LENGTH BETWEEN POWER
WIRE GAUGE
#24
#22
#20
#18
#16
Power Transformer
See table below for Max Wire Length
TRANSFORMER AND TOUCHPAD
Up to 50 feet
Up to 75 feet
Up to 125 feet
Up to 200 feet
Up to 300 feet
Power Converter
USB Connector