CUTRA Wondercutter Інструкція з експлуатації - Сторінка 8
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Різак CUTRA Wondercutter. CUTRA Wondercutter 10 сторінок.
Друкувати сторінку
Product and battery standards
Model Number
Oscillation Frequency
Body Dimensions
Handle Dimensions
Body Weight
Handle Weight
Max. Power Consumption
Charger
Ambient Condition
Use Time
Type
Nominal Capacity
Rated Voltage
Battery Charging Time
Usage period
11 Self-diagnosis
Before requesting repair
When the product does not function, check the following before requesting any type of repair.
Symptoms
The power button won ' t turn
on.
The handle switch won ' t work.
The handle makes noise
and it does not cut well.
WC40000F25W
40 kHz
175 x 102 x 62 mm
Ø 28 x 104 mm
Approx. 670 g
Approx. 85 g
30W
INPUT: AC100~240V, 50/60Hz, 1.5A MAX
5 ~ 35 ℃
Approx. 1 hr 30 min. cycled
Lithium-Ion battery
2600 mAh
11.1 V
Approx. 2 hrs
300 cycles
Checklist
Is there any remaining
battery?
Is the power button off?
Was the handle switch pressed
for a moment only?
Is the LED light on the
handle off?
Is the blade fixed?
Is the blade bent or broken?
Is the blade setscrew
Solutions
Connect the charger to the
back side of the main body.
Turn the power button on.
Continuously press the handle
switch.
After 10 minutes of use the
product automatically turns
to stand-by state. Press
the handle switch to use
the product again after
cooldown for safe use.
To prevent the product from
overheating, it automatically
stops operating
and turns into
the stand-by state. Turn the
power off and tighten the
setscrew before restarting.
Fix the blade and setscrew
tight.