Artos Denby M06860 Посібник з монтажу - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник з монтажу для Обігрівач Artos Denby M06860. Artos Denby M06860 6 сторінок. Towel warmer hardwired version

Друкувати сторінку

1. Check that all the installation pack contents have been received. There should be 3

items as shown below:

Brackets

2. DISCONNECT POWER SUPPLY. Connect timer to power supply. The timer can be

placed anywhere in the room ( recommended beside the light switches ) . Refer to in-

structions provided with timer for wiring details.

3. Determine location of towel warmer and provide a single gang electrical box 4 " below

bottom right of towel warmer ( see spec. sheet ) . Note: where possible, attach at least

two of the brackets to a firm wall stud.

4. Attach bracket pieces 1,2,3, and 4 to towel warmer using diagram 1 below as a guide.

Typically the brackets are positioned between the 2nd and 3rd bars from the top and

bottom. To allow maximum hanging space for the towel, position brackets as near to the

edges as possible.

Diagram 1

#2 Front Cylinder

#8 Cap

Head

#1 Securing

Bolt

#3 Rear Cylinder Head

#4 Inner Rear

Cylinder

Horizontal Bars

INSTALLATION STEPS

Hardwire Kit

#7 Locking Screw

#5 Wall Fixing

Screw

#6 Outer Rear Cylinder

Timer