Aluprof DM45S-10 Посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник для Двигун Aluprof DM45S-10. Aluprof DM45S-10 17 сторінок.

Technical data

- power supply: 230 VAC / 50 Hz

- mechanical limit swiches

- maximum time of continous work: 4 min.

- operating temperature:

~ -25

C ~ +50

C (protection degree IP44)

The manufacturer reserves a margin tolerance

with respect to the catalogue data due to use

in a variety of conditions.

- Installation of the motor should be carried out by authorized persons

- The motor is designed for use in dry rooms and should not be exposed to direct weather conditions.

- The motor should be powered by a separate circuit and protected by a quick fuse for example: circuit breaker type B10

" In accordance with the provisions of the Directive of the European Parliament and of the Council 2012/19 / EU of 4 July 2012 on waste

electrical and electronic equipment (WEEE), it is prohibited to place of used equipment together with other wastes, marked with crossed

out wheeled bin symbol. The users are obliged to transfer their used equipment to a designated collection point for proper processing.

The marking means, at the same time, that the equipment was put on the market after 13 August 2005.

These legal obligations have been introduced to reduce the amount of waste generated from waste electrical and electronic equipment

and to ensure an appropriate level of collection, recovery and recycling. The equipment does not contain any dangerous components,

which would have any particularly negative impact on the environment and human health."

MANUAL FOR DM MOTORS, SERIES S

NOTE

Headquarters; Production plant in Bielsko-Biała

Warszawska 153, 43-300 Bielsko-Biała, Poland

+48 33 81 95 300, fax. +48 33 82 28 512

- 4 -

Production plant in Opole

ul. Gosławicka 3, 45-446 Opole, Poland

tel. +48 77 40 00 000, fax. +48 77 40 00 006