Aluprof DC1675 Інструкції з програмування - Сторінка 2

Переглянути онлайн або завантажити pdf Інструкції з програмування для Передавач Aluprof DC1675. Aluprof DC1675 4 сторінки.

3. OPERATING MODE CHANGE

Press and hold the "MODE"

button for 3 seconds. The mode

will be changed.

Manual mode - without time control function,

Automatic mode - with time control function,

Random mode - with time control function with a random selected time within ± 15 minutes to the set automatic time.

4. ACTIVE CHANNEL SELECTION

Switch to automatic or

random mode.

The function only applies to the DC1676 transmitter. By default, all channels are active.

PROGRAMMING INSTRUCTIONS FOR THE WALL TRANSMITTER: DC1675 AND DC1676

By reapitting procedure

will change mode between:

"Manual",

"Automatic",

"Random".

Select the chosen channel.

Hold down the "K-" button

for 3 seconds, digits of the disabled

channel will flash.

Holding the "K-" button again

for 3 seconds turns on the

selected channel.

We reserve the right to any technical change.

Valid on 2022.02.09