Aluprof AC 277-01 Посібник з програмування - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з програмування для Блок управління Aluprof AC 277-01. Aluprof AC 277-01 8 сторінок.
Друкувати сторінку
8. SETTING OF THE CONTINUOUS OPERATION TIME
Turn on the power of the
control unit.
9. SETTING THE AUTOMATIC CLOSING TIME
Turn on the power of the
control unit.
10. PHOTOCELL SETTINGS
Set switch 2 to
the "ON" position.
11. SAFETY EDGE SETTINGS
Set switch 1 to
the "ON" position.
We reserve the right to any technical change.
Valid on 2021.06.07
PROGRAMMING MANUAL FOR THE AC 277-01 CONTROL UNIT
Set switch 5 to
the "ON" position.
Set switch 5 to
the "OFF" position.
active photocell
safety edge is active
Press the "SUB" or "ADD"
button to set
the time in seconds.
Press the "SUB" or "ADD"
button to set
the time in seconds.
Set switch 2 to
the "OFF" position.
Set switch 1 to
the "OFF" position.
The setting has been saved.
The setting has been saved.
inactive photocell
safety edge is inactive
5