Cutting JK150 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Різак Cutting JK150. Cutting JK150 9 сторінок. Pipe hole cutter

end of the chain and pull it snugly around the pipe. Hook the closest chain pin on the wear

plate and firmly tighten the swivel handle to hold the Hole Cutting Tool to the pipe.

4. The base of the JK150 Hole Cutting Tool includes a level vial that can be used to align a

series of holes. (as photo above)

5. With one hand on the Hole Cutting Tool to stabilize and guide it, slightly loosen the swivel

handle to allow final positioning of the tool. Align the pilot drill with the desired cut location,

and firmly tighten the swivel handle. Do not remove your hands from the Hole Cutting Tool

until you have confirmed that it is securely attached to the pipe. The Hole Cutting Tool must

be securely and squarely attached to the pipe to help reduce the risk of hole saw jamming.

Swivel handle

Operating Instructions

Warning: eye protection, cutting injury and entanglement danger

Always wear appropriate eye protection. Cutting tools can break or shatter. Cutting

produces chips that can be thrown or fall into eyes. Do not use for hot tapping. When

cutting into an existing system, the pipe must be drained and depressurized prior to

cutting. This reduces the risk of electrical shock and other serious injury. Do not wear

gloves or loose clothing when operating machine. Keep Sleeves and jackets buttoned.