Cutting Edge CEP400 Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для Зарядний пристрій Cutting Edge CEP400. Cutting Edge CEP400 19 сторінок. Mppt charge controller
Друкувати сторінку14. Error Code Chart
Code
E00
E01
Over-discharged
E02
E04
E05
Load Overload
E06
E08
Over-amperage
E10
E13
Reverse Polarity
E14
Reverse Polarity
*Please contact professions for technical support on additional troubleshooting.
Error
No Error
No action needed.
Battery voltage is too low.
Battery
DC load will be turned off until battery re-charges to
recovery voltage.
Battery voltage has exceeded controller limit.
Battery
Check battery bank voltage for compatibility with
Over-voltage
controller.
Load Short
DC load short circuit.
Circuit
DC load power draw exceeds controller capability.
Reduce load size or upgrade to a higher load capacity
controller.
Controller exceeds operating temperature limit.
Overheating
Ensure the controller is placed in a well-ventilated cool,
dry place.
Solar array amperage exceeds controller rated input
Solar
amperage.
Decrease the amperage of solar panels connected to the
controller or upgrade to a higher rated controller.
Solar array voltage exceeds controller rated input voltage.
Solar
Decrease the voltage of solar panels connected to the
Over-voltage
controller.
Solar
Solar array input wires connected with reverse polarity.
Disconnect and re-connect with correct wire polarity.
Battery
Battery connection wires connected with reverse polarity.
Disconnect and re-connect with correct wire polarity.
Description & Quick Troubleshoot
17