Aluro Aerosol Max Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Медичне обладнання Aluro Aerosol Max. Aluro Aerosol Max 8 сторінок. Extra oral suction unit

Друкувати сторінку

PRODUCT FEATURES

CENTRIFUGAL FAN

The fan has a brushless direct current motor with a maximum service life of 40 thousand

hours. We assure the highest reliability, and the fan will require no maintenance. The fan

produces low operating noise, high rotation speed, high air volume, high air pressure, and

high efficiency

LCD DISPLAY

Independently developed microcomputer LCD with a programmable single chip brings

digital control. A simple interface displays the operating parameters. The mode of the fan is

automatically checked. When there is a blockage in the tubing, or the filter is saturated, and

in, other situations, the system will automatically signal an alarm with an audible sound. It

will operate with low-pressure power to improve safety.

FILTERS

The Aerosol Max/RD80 has five levels/layers. It has a washable primary effective filter, water

vapor ab sorbing filter, H13 HEPA filter, an active carbon filter, and an UVC photo oxygen

catalytic sterilisation system. The first step uses a washable primary effective cotton filter,

then a watervapour absorbtion filter to effectively filter spray, including blood and other

large particles. The third step filters out 99.97% of aerosol related pathogens through our

customized H 13 HEPA highly efficient filter plus an active carbon filter.

The last step is through the UVC photo oxygen catalytic sterilization module, which sterilises

and exhausts air to the outside. The result, a tower-like filter purifies the air.

In conclusion, this product will make the air clean and fresh to improve the cleanliness of the

treatment environment and reduce the rate of viral cross-infection. This achieves our goal of

minimising infection.

www.aluroequipment.co.nz //

First Layer - Washable primary effective cotton

Period frequency - 30 days

2. Material - Aluminium alloy frame; Washable synthetic fiber

3. Features - Preliminary filter droplets, aerosols, cutting dust, debris, blood

4. Size - 360*220*50mm

Second layer - Water vapour absorbing filter

Period frequency - 2 months

2. Material - Aluminium alloy frame; Special synthetic fiber

3. Features - Absorbs all moisture, droplets and aerosols

4. Size - 360*220*100mm

Third layer - H13 HEPA

Period frequency - 6 Months

2. Material - Aluminium alloy frame; H13 glass fiber

3. Features - blocks particles less than 0.3 micron

4. Size - 360*220*50mm

Fourth layer - Active carbon filter

Period frequency - 6 Months

2. Material - Aluminium alloy frame; Special activated carbon

3. Features - absorbs odour and fumes

4. Size - 360*220*50mm

Fifth layer - UVC disinfection lamp

Power: 10w

2. Features: Disinfection and sterilisation

3. Wavelength: 253.7nm

PH 0800 800 805