CVTE WG13C Посібник користувача - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник користувача для Спікери CVTE WG13C. CVTE WG13C 12 сторінок.

1、If there is no signal input, such as pause playback, the product will be in 15 minutes in standby mode

2、Clear WiFi preset password, followed by five combinations of buttons:Play,Vol+,Power,Play,Power

Connecting

1. Brief introduction

（1）Open the app.

（2）Click the Icon 'Add Device', select the WIFI channel.

（3）Press the speaker "WIFI" button until the light flashes quickly.

（4）Click continue, click the link after entering the router password, wait to add equipment.

2. Adding a device connected to the router

Open the app again, it will find all devices connected.

3.How to add other non-connected devices

Connected other devices to a wireless network, please follow these steps：

step1. Click the icon '+'on the Device list.

Step2. Then add a device as the first time add same device.

Step3. After the addition,you can see the newly added device appears in the device list, as shown:

4.Renaming Devices

After adding a device, the device name can be changed according to your needs.Step as shown:

（1） Click the"Settings"button in the interface of device lists.

（2）Renameing the device : Customizing or choosing the recommended name.

- 6 -