Alva GH301 Інструкція з експлуатації - Сторінка 10

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Газовий обігрівач Alva GH301. Alva GH301 12 сторінок.

Друкувати сторінку

If any part of the heater is in need of replacing, use only original

Alva parts. Using any other spare parts is dangerous and will

void the warranty. When the heater is not going to be used for an

extended period of time, keep covered or in its box, to prevent

dust from settling on the panels. When removing the heater from

storage, use a vacuum cleaner to clean the panels before re-use.

FREQUENTLY ASKED QUESTIONS

Why is there an odour when I use a gas heater?

All gas appliances give off an odour. This could be

harmful if inhaled for extended periods of time. This

"smell" is normal, and it does not mean that you have

a gas leak. The smell of raw gas (just before you ignite

the appliance) differs to the smell coming from the

heater when it is in use. The odour is added to allow

easy gas detection.

Why must there be ventilation when using a gas

heater?

Whenever fuel (LP Gas in this case) is burned,

ventilation is needed. Any fire needs oxygen to burn.

Think of a fireplace, you require a chimney or flue for

the smoke to exit the house. Even though a gas heater

does not generate smoke, it still generates carbon

monoxide and carbon dioxide, which can be dangerous

if not diluted by fresh air. Always ensure adequate

ventilation by leaving a door or window open in the

same room.

When I open a door or window for ventilation won't

I get cold?

The Alva GH301 is an infrared radiant gas heater.

Infrared heaters heat objects as well as the air. This

means, that even though you have cooler air coming

into your room, the infrared heater will warm the room

and make sure that you do not feel the cold.

How long will the gas in my cylinder last?

This depends on how you use your heater. It is easy to

calculate your gas consumption. Take the capacity of

the gas cylinder in grams (i.e. 3000g for a 3 kg

cylinder) and divide it by the gas consumption of the

heater, on your desired setting (refer to the

Specifications section in this manual (page 9). The

answer to the calculation is the approximate number of

hours that your heater will burn for.

How to test if

your cylinder

is overfilled

http://www.

youtube.com/

watch?v=Ya

vsYE8nzCw

&feature=plcp