Alva GDH100 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Варильна поверхня Alva GDH100. Alva GDH100 18 сторінок.
Також для Alva GDH100: Посібник (17 сторінок)

Друкувати сторінку

This appliance is designed for use with LPG ONLY. When this

appliance is to be permanently installed the installation should

only be carried out by a qualified gas fitter who is registered with

LPGSASA and that such installations should comply with the

requirements of SANS 10087-1 or SANS 827 as applicable.

•

Good room ventilation is vital for the efficient performance

of the appliance and for the safety of the occupants in the

room in which the appliance is installed.

•

Cooking appliances generate considerable heat. The layout

and materials of the surrounding cabinets should take

account of these characteristics.

•

Surfaces of cabinets immediately adjacent to the hob should

be able to withstand temperature of up to 100°C without

delaminating or discolouring.

•

Make sure that the unit is well levelled in relation to the

ground. Improper levelling can affect the function of the

appliance.

•

Ensure no items which can catch alight easily (eg. curtains)

are near the gas hob.

•

Allow an unrestricted air space of at least 150mm at the

sides and 750mm above the hob.

Diagrams below show the aperture dimensions in the work top to

install the gas hob

4 BURNER HOB

2 BURNER HOB

INSTALLATION

5 BURNER HOB

Note: This appliance is

designed for use with

a 2.8 kPa SANS 1237

regulator with SANS

1156-2 approved hose.

Using any other type

of regulator or hose is

extremely dangerous.

Regulator and hose

sold separately.