AKO BY 801 S Посібник з монтажу та експлуатації - Сторінка 4
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Обігрівач AKO BY 801 S. AKO BY 801 S 12 сторінок. Infrared radiator
Також для AKO BY 801 S: Посібник з монтажу та експлуатації (16 сторінок)
Друкувати сторінку
EN
4. Operation
The radiator heats the objects
or persons upon which/whom it
is directed without also directly
heating the indoor air.
The radiator can be tilted
downwards by a maximum of
40°.
Note! Adjustments must only
be made when the device is
fully cooled. Danger of burns!
The device is turned on and off
by pulling on the cord switch.
Whether the device is switched
on or off can be read in the
display window.
Display 0
Display 1
Off
500 W
W = output power in watts.
Note!
As there is a danger of bodily overheating, the following must
be observed:
• Small children with high body temperatures must not be
exposed to the device's radiation.
• Children must be kept at least 100cm away from the
radiator.
• Exposure to the device's radiation must not exceed 15
minutes.
Small children must be prevented from looking directly at the
radiator.
5. Faults
If the heating device does not give off heat, check the following
points:
• Is the display at "0"?
• Is the fuse in the fuse box switched on?
If you cannot remedy the fault, please contact your electrical
retailer.
If required, you can also address your queries to the service
hotline of Glen Dimplex Deutschland GmbH.
Tel: +49 (0) 9221 709-564
Fax: +49 (0) 9221 709-589
To process your order, please state the device type as well as
its production number (E No.) and manufacturing date (FD).
This information is listed on the type plate.
Repairs and corrective measures may only be carried out by a
qualified electrician or by your after-sales service.
6. Cleaning
Switch off the device and let it cool down before cleaning it.
Note! Do not touch the reflector or heating element with bare
hands.
External device surfaces can be wiped with a damp cloth and
domestic cleaner; they must be thoroughly dried afterwards.
No scouring agents or polishes should be used.
Dust which gathers inside the device can be removed using a
brush with soft, long bristles.
If the device is heavily soiled, it should be cleaned by a
specialist.
7. Changing the Heating Element
A heating element must only be changed by a specialist.
Pull the device plug and let the heating device cool down.
Do not touch the heating element or reflector with bare hands.
Use a cloth to protect the surface.
- Loosen the front grill screws (A) and remove the front grill.
- Remove push-on connections using a suitable tool.
- Pull out the two fixing brackets (B).
- Remove the heating element.
- Insert new heating element.
Carry out assembly in reverse order.
8. Technical Data
Nominal power
Connection voltage
Degree of protection
Protection class
Dimensions
Weight
9. Warranty
This product is supplied with a two-year warranty according to
our terms of guarantee.
10. Note on Disposal
Do not dispose of the unit with general household
waste. The device must be taken to a local waste
disposal plant.
Glen Dimplex Deutschland GmbH
Am Goldenen Feld 18, D-95326 Kulmbach
www.dimplex.de
4
500 Watts
230 V~, 1/N/PE
IP 24, splash-proof
I, with protective conductor
768 x 100 x 92 mm
1,8 kg
by-en_ba 07/09/A