DLS CA22 Як встановити та експлуатувати - Сторінка 10
Переглянути онлайн або завантажити pdf Як встановити та експлуатувати для Автомобільний підсилювач DLS CA22. DLS CA22 16 сторінок.
Друкувати сторінку
Speaker wiring CA 41
Four fullrange speakers to CA41. One pair in
front and one pair in rear.
Rear speakers
Filter settings A/B Channels
HPF
50Hz 220Hz
15Hz 500Hz
Off On
With the HPF-filter in OFF position the amplifier
allows the speakers to play fullrange. If you for
some reason want to limit the low bass
reproduction switch on the HPF-filter. The typical
setting is then around 60 – 80 Hz.
The LPF-filter switch should be in OFF-position
Filter settings C/D Channels
HPF
Multiply
50/500Hz 220/2(k)Hz
Off On
x1 x10
15/150Hz 500/5(k)Hz
With the HPF-filter in OFF position the amplifier
allows the speakers to play fullrange. If you for
some reason want to limit the low bass
reproduction switch on the HPF-filter. The typical
setting is then around 60 – 80 Hz.
10
Front speakers
LPF
Multiply
80/800Hz
200/2(k)Hz
x1 x10
Off On
50/500Hz 500/5(k)Hz
Two fullrange speakers and one subwoofer to
CA41.
Rear subwoofer
Filter settings A/B Channels
HPF
50Hz 220Hz
Off On
15Hz 500Hz
Off On
The subwoofer should be connected to channel A/
B in bridge mode.The Grand Bass mode can now
be used for the subwoofer.
Set the HPF-filter switch to ON-position. Adjust the
filter setting to 25-40 Hz.
Set the LPF-filter switch to ON-position and the
Multiply swich to x1. Adjust the frequency setting to
70-90 Hz.
Filter settings C/D Channels
HPF
Multiply
50/500Hz
220/2(k)Hz
Off On
x1 x10
15/150Hz 500/5(k)Hz
With the HPF-filter in OFF position the amplifier
allows the speakers to play fullrange. If you for
some reason want to limit the low bass
reproduction switch on the HPF-filter. The typical
setting is then around 60 – 80 Hz.
CA41
Rear or front speakers
LPF
Multiply
80/800Hz
200/2(k)Hz
x1 x10
50/500Hz 500/5(k)Hz