DLS FlexxPump 500 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Водяний насос DLS FlexxPump 500. DLS FlexxPump 500 11 сторінок.

FlexxPump 500 DLS

Continuation sheet

Revision: 0

5. Assembling the housing on the power unit

of the FlexxPump 500 DLS.

 Place the dismantled housing on the

FlexxPump 500 DLS and press it onto the

power unit.

 Fasten the housing to the power unit by

turning the retaining ring clockwise.

 The retaining ring must snap into place

when turning and be completely tightened.

 If you only removed the lid to fill the

cartridge, put it back onto the housing and

move it to the position CLOSE.

6. Remove the protective caps on the side

of the FlexxPump 500 DLS.

 Remove the black protective cap from the

side of the electrical M12x1 interface.

7. Connect the electrical interface

 Connect the FlexxPump 500 DLS to the

external power supply or controller via the

M12x1 interface on the side of the Flexx-

Pump 500 DLS using a suitable connecting

cable.

 Depending on the application, both

connection cables with straight or angled

sockets can be used.

 Please refer to chapter 8.1 for the condi-

tion of the connection cable.

D L S

SCHMIERSYSTEME

D I R E C T

L U B R I C A T I O N

S Y S T E M S

EN-