DLS Cruise CRPP-VO2.14 Посібник користувача - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільна стереосистема DLS Cruise CRPP-VO2.14. DLS Cruise CRPP-VO2.14 16 сторінок. For volvo

Друкувати сторінку

Installation

Dismount door panel

Dismount the door by removing the cover of the

door panel.

Hint: Use plastic PRY tools to avoid marks on

the panels or damaging the plastic clips.

XC90

1) Remove the cover behind the door handle. Use

PRY tool. Behind the cover are two T20/T25 screw.

Unscrew them. Move the door panel upwards.

Hint: Sometimes it's easier to remove the window

control panel and unplug the harness, before lifting

up the door panel.

S90/V90

Remove the trim panel by using a PRY tool.

Start at 1) and move towards 2).

Behind the trim panel are two 7mm bolts located.

Remove screw.

3) Remove the window control panel using PRY

tool. Unplug the harness. T20/T25 screw is located

under the panel. Remove screw.

4) T20/T25 screw can be seen from under the arm

rest, or there can be a cover that needs to be

removed.

Move the door panel upwards.

Remember: Use the PRY tools to avoid

marks on the panels or damaging the

plastic clips

S60/V60

1) Remove the window control panel with PRY

tool.Behind the control panel is one T25 screw

located. Unscrew it. Unplug the harness.

Start by removing the cover by the speakers. Use a

PRY tool.

2) Start in the inside of the cover. Work your way

towards the door handle.

3) Push the trim in the direction of the arrow. (There

is a hook behind the trim)

Behind the trim is a 7mm bolt. Unscrew the bolt.

Unplug the harness.

4) Under the arm rest is one T25 screw. Unscrew it.

Move the door panel upwards.