DM Bath DMV3602 Посібник з монтажу - Сторінка 2

Переглянути онлайн або завантажити pdf Посібник з монтажу для Внутрішнє оздоблення приміщень DM Bath DMV3602. DM Bath DMV3602 8 сторінок.

Getting Started

PLEASE READ CAREFULLY - IT IS RECOMMENDED THAT A QUALIFIED, LICENSED TRADES

PROFESSIONAL INSTALL YOUR UNIT.

All products must be inspected prior to installation. If damages are found due to transit or manufacturing defects then

DO NOT PROCEED WITH INSTALLATION and advise supplier immediately. Manufacturer will not be liable for any

installation, removal or re-installation costs. The warranty will be null and void if damage occurred during or after

installation.

When installing the vanity cabinets – the drawers and doors may need to be adjusted, due to movement during shipping.

Please view the instructions below on drawer and hinge adjustment.

Dezign Market accepts no liability for any damage to products or for any personal injury during installation.

Caution

Any wall to which product is fixed must properly support the weight of the vanity, sink and countertop. Secure to stud

framing or bracing (spanning the full length of the vanity) behind the finished wall. To ensure proper support and

alignment, the finished wall must be straight, the floor must be flat and perpendicular to the finished wall.

When moving the vanity, do not slide or side-load the legs, doing so WILL RISK DAMAGE TO THE VANITY.

Required Tools & Materials

Tape Measure

Pencil

Ø12mm

Phillips Screwdriver

Electric Drill

Screws

Level

100% Silicone

Sealant