3M Digital Projector X75 Посібник з безпеки продукції - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник з безпеки продукції для Проектор 3M Digital Projector X75. 3M Digital Projector X75 14 сторінок. Safety guide
Також для 3M Digital Projector X75: Брошура та технічні характеристики (4 сторінок), Посібник із швидкого старту (4 сторінок), Посібник із швидкого старту (4 сторінок), Технічні характеристики (2 сторінок)

•

To reduce the risk associated with environmental contamination:

Dispose of exhausted batteries in accordance with applicable federal, state and

local regulations.

•

To reduce the risk associated with environmental contamination due to mercury:

Dispose of lamp cartridge in accordance with applicable federal, state and local

regulations.

•

To reduce the risk associated with laser radiation, which if not avoided may

result in minor or moderate injury:

Never look directly at the laser output of the remote control or point it at other people.

Never attempt to make any adjustments to the internal controls of the remote

control other than those described in the Operator's Guide.

•

To reduce the risk associated with explosion, and/or chemicals from a leaking battery:

Use only with battery type AA or equivalent.

Orient the battery's plus (+) and minus (-) terminals of the batteries according to

the markings found on the remote control.

Do not leave the battery in the remote for an extended period of time.

Do not heat, disassemble, short, recharge, or expose to ﬁre or high temperature

Do not carry batteries loose in your pocket or purse.

Avoid eye and skin contact in the event that battery would leak

Do not mix used and new batteries.

•

To reduce the risk associated with the hot surface of exhaust loovers:

Do not touch exhaust loovers during operation.

•

To reduce the risk associated with the impact of a falling projector:

Use only the 3M™ brand wall/ceiling mounting hardware kit if wall or ceiling

mounting is desired.

Installation of the 3M™ wall/ceiling kit must only be performed by qualiﬁed personnel.

Adhere strictly to the proper installation procedure as outlined in the installation

instructions when installing the 3M™ wall/ceiling kit.

Always operate the unit on a ﬂat, sturdy, and horizontal surface.

•

To reduce the risk associated with intense visible light:

Avoid looking directly into the projector lens while the lamp is on.

•

To reduce the risk associated with tripping and/or impact:

Position the power cord and data cable so that they cannot be tripped over.

CAUTION

3M™ Multimedia Projector X75 Product Safety Guide