Blue Robbie Посібник оператора - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник оператора для Мікрофон Blue Robbie. Blue Robbie 10 сторінок. Blue microphones robbie signal processors: user guide
Також для Blue Robbie: Посібник користувача (4 сторінок)
Друкувати сторінку
O P E R A T I O N S
AC Power
Robbie operates at 115VAC with USA power supply, or 230VAC with European power supply. Connect the male
end of the AC power supply cable to Robbie by lining up the large top center tab with the large top center
slot on Robbie's female AC input jack. Make sure the cable is inserted fully into the jack and then gently twist
to the right until it clicks into place. To detach the AC cable, slide the spring-loaded metal tab toward you
and gently twist to the left.
Front Panel
Robbie's front panel has a gain control, hi-z instrument input, and enclosed vacuum tube.
Gain Control
The continuously variable gain control determines Robbie's output. Gain is variable from a minimum of 8 dB
(fully counterclockwise) to a maximum of 68 dB (fully clockwise). Adjust Robbie's gain control until the desired
level appears on the input level meter of your recording device.
Hi-Z Instrument Input.
1
This is a
⁄
high-impedance instrument level input. It is intended for direct injection (DI) of guitars, bass gui-
4
tars, synths, drum machines and other equipment with an instrument level output. Any signal fed to the
INSTRUMENT input will appear at the LINE output when the MIC/INST selector switch is depressed.
MIC/INST selector switch is in its normal (out) position.
Rear Panel
The rear panel contains Robbie's power switch, power cable input, MIC
input, LINE output, polarity switch, -20dB pad, MIC/LINE selector switch
and phantom power switch.
Power Switch
Powers Robbie On or Off.
Mic In
The balanced XLR female jack is for connection of your microphone
with a XLR microphone cable such as the Blue Kiwi, Cranberry or Blueberry.
Any signal fed to the MIC input will appear at the LINE output when the