Blue Aura Blackline PG1 Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Вертушка Blue Aura Blackline PG1. Blue Aura Blackline PG1 13 сторінок. Bluetooth turntable player

along with this package:
1) Unit
2) Power Adaptor
3) Counterweight
4) Platter with Belt
5) 45 RPM Adaptor
6) Hook
7) Turntable mat
Turntable Platter and Belt Setup
1. Install the drive belt over
the inner ring under the
platter.
2. Place the platter through
the turntable spindle, then
rotate the platter until you
see the drive motor pulley
through the window at the
top left corner.
3. Carefully grab the drive
belt and put it around the slot of motor pulley by using red ribbon attached on the
platter.
4. Connect the power adapter to the turntable and power on the turntable.
5. Set the Motor Start/Stop switch to the Start position to see if the platter motor
spins. If the platter does not spin, try the steps listed above again.

Cartridge Down force Adjustment

The Counterweight supplied is suitable for cartridges weighing between 3.0-6.0g.
1. Gently push and turn the Counterweight onto the rear of the tonearm (with the
scale facing toward the front of the turntable).
2. Remove the cartridge protection cap.
8) Instruction Manual
9) Cartridge Alignment Protractor
10) Anti-skating Weight
11) RCA to RCA grounded cable
12) EU+UK power adapter
5