BLUE CHIP Adapt Pro Elite 9200 Посібник користувача - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник користувача для Медичне обладнання BLUE CHIP Adapt Pro Elite 9200. BLUE CHIP Adapt Pro Elite 9200 17 сторінок.
Друкувати сторінку
9.
TROUBLESHOOTING
PROBLEM
The mattress is not able to
connect with the Pump
The Pump is showing no
indications of working
Power failure alarm failed
The low pressure light is
constantly flashing and the
alarm is sounded
The Pump is on but the
mattress is not alternated
Service (Malfunction)
Alarm is on
The Pump is operating
noisily
Patient is bottoming out
(without alarm triggered)
If the above information does not solve the problem, please contact your local dealer or agent for further support.
Check if the mattress model (model no. located inside the cover by
l
Check the ma5ress model (model no. located inside the cover
Check the ma5ress model (model no. located inside the cover
Check the ma5ress model (model no. located inside the cover
Check the ma5ress model (model no. located inside the cover
by the foot end) Make sure that connector hoses line up with
by the foot end) Make sure that connector hoses line up with
by the foot end) Make sure that connector hoses line up with
by the foot end) Make sure that connector hoses line up with
the foot end) xxAAAxxx matches with the Pump model xxBBB-xxx.
the pump. If not, please contact Blue Chip.
the pump. If not, please contact Blue Chip.
the pump. If not, please contact Blue Chip.
the pump. If not, please contact Blue Chip.
The AAA should be the same as BBB. If not, please contact with the
agent or distributor.
Check if the Transport Cap is removed and make sure the
l
connector is not broken.
Check if the plug is connected to the mains supply.
Check if plug is locked into pump and plugged into power outlet
Check if plug is locked into pump and plugged into power outlet
Check if plug is locked into pump and plugged into power outlet
Check if plug is locked into pump and plugged into power outlet
l
Check if the power switch is switched to ON position (press
l
Check if there is any blown fuse.
l
If the Pump is in operation but failed to trigger the power failure
l
alarm during power off. Charge the Pump for 6 hours or more of
operating time and if the power failure still not works then please
contact the dealer or agent for further investigation.
Check if the CPR is at CLOSE position
l
Check if the connection between air tubes to Pump unit is tightly
l
secured.
Check if all coupling connections along mattress are secured.
l
If the mains supply is normal but there is no sound of the Pump,
l
If the power supply is normal please remove the connector from
If the power supply is normal please remove the connector from
If the power supply is normal please remove the connector from
If the power supply is normal please remove the connector from
the pump to check if there is air coming out. If not, turn off
the pump to check if there is air coming out. If not, turn off
the pump to check if there is air coming out. If not, turn off
the pump to check if there is air coming out. If not, turn off
please remove the connector from the Pump to check if there's air
pump and contact Blue Chip for further invesGgaGon.
pump and contact Blue Chip for further invesGgaGon.
pump and contact Blue Chip for further invesGgaGon.
pump and contact Blue Chip for further invesGgaGon.
comes out. If not, please turn off the machine and contact the
dealer or agent for further investigation.
If all of above steps have been checked. Press "Alarm Mute" for
l
system to be verified again.
Ensure the mattress inflation is completed.
l
Check the Pump control panel the indicator of "Alternate" should
l
be lighted on, if not, switch it to "Alternate."
Check if "Service" alarm indicator is on with buzzer, if yes, contact
l
please contact Blue Chip.
please contact Blue Chip.
please contact Blue Chip.
please contact Blue Chip.
the dealer or agent for further investigation.
Press "alarm mute" for system to be verified again. If the alarm is
l
please contact Blue Chip.
please contact Blue Chip.
please contact Blue Chip.
please contact Blue Chip.
still on, please contact dealer or agent.
Ensure Pump is on a solid surface or a5ached to footboard of bed
Ensure Pump is on a solid surface or a5ached to footboard of bed
Ensure Pump is on a solid surface or a5ached to footboard of bed
Ensure Pump is on a solid surface or a5ached to footboard of bed
Make sure the Pump is resting against a solid surface.
l
If the noise is getting louder, contact the dealer or agent for further
l
investigation.
Pressure setting might be inadequate for the patient, adjust
l
comfort level to FIRM (refer to Table 1 Weight and Comfort Level
Reference Table) and wait for a few minutes for better comfort.
Follow the procedures "The low pressure light is constantly flashing
l
and the alarm is sounded" for inspection.
please contact Blue Chip for further support.
please contact Blue Chip for further support.
please contact Blue Chip for further support.
please contact Blue Chip for further support.
14
15
15
15
15
SOLUTION
please contact Blue Chip.
please contact Blue Chip.
please contact Blue Chip.
please contact Blue Chip.
).