Blue Clean AR 2N1-Q Інструкції з монтажу, догляду та використання - Сторінка 11
Переглянути онлайн або завантажити pdf Інструкції з монтажу, догляду та використання для Мийка високого тиску Blue Clean AR 2N1-Q. Blue Clean AR 2N1-Q 20 сторінок. Electric pressure washer 2050 psi
Друкувати сторінку
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
• Make sure the power switch is off.
• Unwind the power cord completely and plug
into a grounded 120 volt outlet.
• Turn on water supply at the faucet to completely
open.
• Turn the safety lock button on the spray gun to
unlocked. While pointing the spray gun in a safe
direction, squeeze the trigger on the spray gun until
there is a steady stream of water, letting the water
and air out of the hose.
• Push the power button to turn the unit on (green
power light will turn on). The unit will turn on for 1 - 2
seconds and shut off. This is a normal function of
the auto start feature.
• Begin power washing by squeezing the trigger on the
spray gun all the way into the handle.
• Release the spray gun trigger to stop the power
washer.
• Allow the motor to come to a complete stop before
squeezing the trigger again.
OFF
• Squeezing and releasing the trigger rapidly will cause
the auto start feature to miss an on/off cycle that
may prevent it from turning on properly. Use slow,
deliberate trigger pulls to avoid this.
lock
K
• Always test a small area to avoid chance of damaging
the surface.
ON
11