Blue Clean 7850 Посібник з використання та обслуговування - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник з використання та обслуговування для Пилосос Blue Clean 7850. Blue Clean 7850 20 сторінок.
Друкувати сторінку- 1. Table of Contents
- 2. Machine Identification
- 3. Technical Features
- 4. Main Parts
- 5. Safety Regulations
- 6. Machine Installation
- 7. Machine Start up
- 8. Regulation of the Operating Pressure
- 9. Hydraulic System
- 10. Labels
- 11. Maintenance
- 12. Maintenance
- 13. Cooling Coil Internal Cleaning
- 14. Warranty
- 15. Declaration of Conformity
- 16. Declaration of Conformity
AR BLUE CLEAN
Connect the water supply hose D to the infeed fitting E (see fig. 5). It is recommended
to use a reinforced hose having an inner diameter of at least 10 mm. The water intake
must be of at least 15 l/min and have a max inlet temperature of 60 °C.
Fill the fuel tank F (see fig. 6) with gasoil (Diesel).
Fill the detergent tank G (see fig. 6) with a biodegradable product.
G
Make sure that the electrical tension and amperage are suitable for the machine. The
cleaner must be connected to a suitable feeding point equipped with an efficient
contact to earth and controlled by an overload cut out switch.
USE AND MAINTENANCE HANDBOOK
The detergent is applied by opening the intake device of the lance
(on the position - see figure) and then operating with the gun
lever.
E
D
F
7830 - 7850 - 7870
Fig.5
Fig.6
page 8