Blue Clean 7870 Посібник з використання та обслуговування - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник з використання та обслуговування для Пилосос Blue Clean 7870. Blue Clean 7870 20 сторінок.
Друкувати сторінку- 1. Table of Contents
- 2. Machine Identification
- 3. Technical Features
- 4. Main Parts
- 5. Safety Regulations
- 6. Machine Installation
- 7. Machine Start up
- 8. Regulation of the Operating Pressure
- 9. Hydraulic System
- 10. Labels
- 11. Maintenance
- 12. Maintenance
- 13. Cooling Coil Internal Cleaning
- 14. Warranty
- 15. Declaration of Conformity
- 16. Declaration of Conformity
AR BLUE CLEAN
6.
SAFETY REGULATIONS
Make sure that the machine is constantly supplied with water. Dry working
•
would cause serious damages to the machine seal system.
Electrical connections must be carried out by skilled/trained personnel only.
•
Never pull the power cord to disconnect the plug nor pull the hose to move
•
the machine.
Don't leave the machine in a low temperature place and protect it from frost
•
and general bad weather conditions.
Avoid vehicles transit on the high pressure hose.
•
While the machine is running do not cover it and avoid placing it where
•
there's low air supply.
If you are working indoors, it's compulsory to install a fan to discharge the
•
exhaust gases outside.
The fan terminal must not be obstructed. Don't leave the lance or any other
•
object near the exhaust outlet.
The nature of the gases as well as the high temperature are to be considered
•
very dangerous, the operator must thus be adequately informed in order to
avoid being scalded.
Don't leave the machine outside when it rains or when the weather conditions
•
are bad. The operators must wear protection clothes while using the
machine.
Do not leave the machine for more than 15 minutes working with the gun
•
closed, the water temperature would increase rapidly causing serious
damages to the seal system.
Each time the machine has to be switched off blow off the hose residual
•
pressure by using the gun.
Don't put the hands in front of the lance.
•
Do not use different fuels other than the ones recommended by the
•
manufacturer.
Don't carry out any operation on the machine before having unplugged it.
•
Don't carry out any unwary operation on the electric cable and make sure the
•
same is not damaged.
Never direct the high pressure water jet towards people, animals, electrical
•
installations or the machine itself.
Use always only clean water. Dirty water and chemical corrosive products are
•
harmful for the machine.
USE AND MAINTENANCE HANDBOOK
7830 - 7850 - 7870
WARNING !
page 6