Do-All Outdoors RAV1 Монтаж та експлуатація - Сторінка 2

Переглянути онлайн або завантажити pdf Монтаж та експлуатація для Спорт & на свіжому повітрі Do-All Outdoors RAV1. Do-All Outdoors RAV1 4 сторінки. Auto trap
Також для Do-All Outdoors RAV1: Інструкція з монтажу (2 сторінок)

Друкувати сторінку

RAV1

Tools required:

14mm wrench for bolts.

13mm wrench for Nylock nuts.

17mm wrench for mounting

trap to base.

5mm Alllen wrench for horse

shoe/stacker poles

4mm Allen wrench for safety

ring holder

2.5m Allen wrench for limit

switch adjustment

ASSEMBLY

1) Carefully remove trap from box.

2) Bolt axle onto base.

3) Install wheels on axle. insert washer

and wheel clamps onto axle.

4) Bolt on first section on pull handle

underneath the base.

5) Bolt on handle section of pull handle.

6) Carefully mount trap body to base.

7) Install safety ring hardware at the

front And back of trap. Install safety ring.

8) Move throwing arm to the twelve

o'clock position.

9) Insert front hook of spring Into eyelet.

10) Push the main spring bolt through the

hole located at the back of the trap.

11) Attach long stacker poles to trap, open side

facing the back of the trap. Install horseshoe ring

onto stacker poles and tread short poles onto

longer stacker poles. Install horseshoe ring on top.

Install all four safety ring holders. 2 front And 2 back.

12) Install collar and tension knob onto main spring bolt.

turn knob until sufficent tension Is present. Do Not over-tighten.