dobar 50130 Посібник із швидкого старту - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Засіб для догляду за домашніми тваринами dobar 50130. dobar 50130 8 сторінок. Automatic pet feeder for cats & small pets
Друкувати сторінкуInstruction Manual
50130 Automatic Pet Feeder (for Cats & Small Pets)
Introduction
Be familiar with the product before using it for the first time. Please read the follo-
wing operating instructions and the safety instructions carefully. Use the product
only as described and for the specified application areas. Keep these instructions.
Hand over all documents when passing the product on to third parties.
Intended Use
This product is only suitable for the feeding of pets for private use. The product is
not intended for commercial use.
General safety instructions
Damages caused by non-observance of these operating instructions will void the
guarantee claim! No liability is assumed for consequential damages! No liability is
accepted for damage to property or personal injury caused by improper handling or
neglecting the safety instructions!
Features
• 12 or 24 hour clock display
• Feed according to your set time
• Amount of food dispensed is adjustable
• 6 second personal voice message recorder
• Personal Voice message calls your pet when its feeding
time (repeated 3 times)
• The 4 Feeding times can be set for any time of day or night
• C-size alkaline batteries (4pcs) last up to 1 year
• Red LED indicates batteries are Low
Control Panel Keys
• CLOCK – displays clock (current time)
• TIMER – switches between preset feeding times
• VOLUME – sets the feeding volume/portion-size
• SET – enters SET mode, and confirms any feeding times you
enter and advances to the next setting. Also used with VOLU-
ME key to perform manual feedings
• START – starts the feeding schedule, confirms the clock and
feeding-time settings
• DAY – sets the number of days to feed
• REC – records your personal voice message
• PLAY – plays back your personal voice message
Getting Started
1.
Open the battery door (under the unit)
2.
Keep the ON/OFF switch set to OFF. The switch is next to the battery door
3.
Insert four C-size alkaline batteries into the battery tray. Do NOT use old or
low-quality carbon batteries. Close the battery door
Slide the ON/OFF switch to ON
4.
The feeder will cycle one time until (12:00) is flashing on the LCD display
5.
6.
You now have 90 seconds to set the current-time in order for the feeder to
work properly.
7.
Then (1 07) will be displayed on the LCD. If you did not get to set the time cor-
rectly, simply slide the switch to Off, wait 1 minute, then repeat from step-4
General Operation
Reviewing the settings
2
12h-Format
nachmittags
Ziffer 2
Ziffer 1
Ziffer 3
1.
Press the TIMER key to cycle through and view the feeding times. Only the
feeding times per day that are set will be displayed. Digit-1 is the feeding
number each day, Digit-3 & 4 are the feeding times (in hours). Example: (1
07)=(1st feeding at 7am)
Press the VOLUME key once to view the volume/portion-size and feeding
2.
day(s) remaining
3.
Press the DAY key to display feeding day(s) remaining
4.
Press the CLOCK key once to display the current time, the Clock display icon
will now turn ON
5.
If no key is pressed for more than 8 seconds, the display will switch back to
show the next feeding time with the timer icon flashing.
Note: Using the TIMER key to cycle through the feeding times will only
display to the number of feedings you set. The sequence will repeat after
the last one is displayed.
Only the 1st feeding time will be displayed if you've set just 1 feeding
A flashing timer-icon means the feeding-time has not been reached. A
solid timer icon means the feeding-time has already passed
The volume and day display shares the same screen so Digit-1 & 2 are the
feeding day(s) remaining while Digit-4 is the Volume/Portion-size
12h-Format
nachmittags
Ziffer 2
Ziffer 4
Ziffer 1
Ziffer 3
Setting the Current Clock Time
1.
Press the CLOCK key to display the clock
The time and clock display icon will now be displayed
Press and hold (for 2 seconds) the SET key until all digits blink
2.
Press the CLOCK key to set HOUR
3.
Press the TIMER key to set MINUTE
4.
Press the SET key once to confirm time
5.
The display will show either 12 or 24 to indicate clock display mode
6.
Press the CLOCK key to change between 12 or 24-hour display mode
If 12-hour display mode is selected, the 12hr-clock icon will be displayed.
7.
Press the START key to confirm the clock setup
Setting the Feed Time and Number of Feedings per Day
1.
Press the TIMER key to display the feeding-time
2.
Press and hold (for 2 seconds) the SET key until Digit-3 & 4 start flashing
The display will show the 1st feeding time. Example: (1 07)=(1st feeding
at 7am)
Press the TIMER key to set the desired HOUR for feeding. Note the (P) in the
3.
top left corner for PM using 12 hour time
4.
Press the SET key to confirm your setting and proceed to the 2nd feeding time
5.
Repeat step-3 to set the desired hour for feeding the SECOND feeding time
6.
At this point if you want to only feed 2 times per day press the START key and
you're finished. The last feeding-number shown is the number of times to feed
per day. The timer will now automatically start and the TIMER icon will turn
ON.
7.
If you wish to feed a 3rd or 4th time each day, do NOT press the START key and
repeat from step-3
Sanduhr
Ziffer 4
Sanduhr
Uhrzeit-
Symbol