dobar 50131 Інструкція з експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Засіб для догляду за домашніми тваринами dobar 50131. dobar 50131 8 сторінок. Large-capacity automatic pet feeder

Друкувати сторінку

Instruction Manual

50131 Large-capacity Automatic Pet Feeder

Features

• 12 or 24 hour clock display

• Feed according to your set time

• Amount of food dispensed is adjustable

• 6 second personal voice message recorder

• Personal Voice message calls your pet when its feeding time

• The 4 Feeding times can be set for any time of day or night

• D-size alkaline batteries (4pc's required) last up to 1 year

• Red LED indicates batteries are Low

Control Panel Keys

• CLOCK – displays clock (current time)

• TIMER – switches between preset feeding times

• VOL – sets the feeding volume/portion-size

• SET – enters SET mode, and confirms any feeding times you enter and advances to

the next setting. Also used with VOL key to perform manual feedings

• START – starts the feeding schedule, confirms the clock and feeding-time settings

• DAY – sets the number of days to feed

• REC – records your personal voice message

• PLAY – plays back your personal voice message

• ON SWITCH – turns the feeder off. For when the feeder will not be used for an

extended period of time. Turning this switch off WILL RESET all time and feeding

settings

Getting Started

Open the battery door (under the unit)

Keep the ON switch set to OFF.

Insert four D-size alkaline batteries into the battery tray. Do NOT use old or

substandard carbon batteries

Close the battery door and switch ON the feeder. The ON Switch is next to the

battery door

The feeder will cycle one time until (12:00) is flashing on the LCD display

You now have 90 seconds to set the current-time in order for the feeder to work

properly. If longer than 90 seconds passes then (1 07) will be displayed on the

LCD. Simply turn the switch to OFF, wait 1 minute, then repeat from step-3

General Operation

Reviewing the settings

Press the TIMER key to cycle through and view the feeding times. Only the fee-

ding times per day that are set will be displayed. Digit-1 is the feeding number

each day, Digit-3 & 4 are the feeding times (in hours). Example: (1 07)=(1st

feeding at 7am)

Press the VOL key once to view the volume/portion-size and feeding day(s)

Control Panel

remaining

Press the DAY key to display feeding day(s) remaining

Press the CLOCK key once to display the current time, the Clock display icon will

now turn ON

If no key is pressed for more than 8 seconds, the display will switch back to show

the next feeding time with the timer icon flashing.

Note: Using the TIMER key to cycle through the feeding times will only

display to the number of feedings you set. The sequence will repeat after

the last one is displayed.

Only the 1st feeding time will be displayed if you've set just 1 feeding

A flashing timer-icon means the feeding-time has not been reached while

a solid timer icon means the feeding-time has already passed

The volume and day display shares the same screen so Digit-1 & 2 are the

feeding day(s) remaining while Digit-4 is the Volume/Portion-size

Setting the Current Clock Time

Setting the Feed Time and Number of Feedings per Day

Note: If all four feeding-times have been set, the process will terminate

and the schedule will start automatically. The next feeding time will then

be displayed. (If only 1 feeding-time has been set then the feeding-timer

display will not change even if you press the TIMER key.)

Feeding-times must be set in ascending order otherwise the remaining

number of the feeding(s) will not be served.

Setting the Volume/Portion-Size

Note: A Feed-volume of 1 equals ¼ cup (60cc) of food, 2 means ½ cup

(120cc) of food, 3= ¾ cups (180cc) and so on. The number 0 represents 10

portions which is equal to 2.5 cups ( liters).

Digit-1 Digit-2 Digit-3 Digit-4

Setting the Number of Days to Feed

icon

LCD Display

Note: When the timer-icon and all the numbers on the LCD display are

continuously ON, the feeding schedule has started.

Once a feeding schedule has started, you can force it to end by pressing

the SET and START keys together.

Press the CLOCK key to display the clock

The time and clock icon will now be displayed

Press and hold (for 2 seconds) the SET key until all digits blink

Press the CLOCK key to set HOUR

Press the TIMER key to set MINUTE

Press the SET key once to confirm the time

The display will show either 12 or 24 to indicate clock display mode

Press the CLOCK key to change between 12 or 24-hour display mode

Press the START key to confirm the clock setup

Press the TIMER key to display the feeding-time

Press and hold (for 2 seconds) the SET key until Digit-3 & 4 start flashing

The display will show the 1st feeding time. Example: (1 07)=(1st feeding at

7am)

Press the TIMER key to set the desired HOUR for feeding. Note the (P) in the top

left corner for PM using 12 hour time

Press the SET key to confirm your setting and proceed to the 2nd feeding time

Repeat step-3 to set the desired hour for feeding the SECOND feeding time

At this point if you want to only feed 2 times per day press the START key and

you're finished. The last feeding-number shown is the number of times to feed

per day. The timer will now automatically start and the TIMER icon will turn ON.

If you wish to feed a 3rd or 4th time each day, do NOT press the START key and

repeat from step-3

Tip: If you pressed the SET key a 3rd time but you do not want to feed 3 times

per day, press the TIMER key, then Press and Hold the SET key (for 2 seconds)

to start over, remember not to press the SET key after the Second feeding, press

the START key to end your numbers of feeding per day.

Press the VOL key to display feed-volume/portion-size

Press and hold (for 2 seconds) the SET key until Digit-4 flashes

Press the VOL key to set the desired volume/portion-size

Press the START key to confirm the volume setup

TIMER

Press the DAY key and the left side of the LCD shows the number of days your

Automatic Feeder will feed for until it stops. The default setting of (0) means the

feeder will feed continuously and never stop

To change the number of days to feed, press the DAY key then press and hold

the SET key (for 2 seconds) until the days flash on the LCD

CLOCK

Press the DAY key to change the number of days. Hold down the DAY key to

speed through the numbers

If you set a number of days to feed (1 to 99 days) then at 6am after the last day

the feeder Alarm will start beeping

To repeat the same schedule without any changes, just press the START key

To feed continuously, set the number-of-days to 0