FlavorChef EP0030K Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Кухонна техніка FlavorChef EP0030K. FlavorChef EP0030K 16 сторінок. Express kitchen system

Друкувати сторінку

Assemby and Use

Control Knob Settings

0 - OFF
P - Pulse
1 - Regular Speed
2 - High Speed
Motor Housing with
Control Knob
Connecting/Disconnecting Bases to the Master Jar
1.
Select a desired Base (see a. below).
2. Align the Base with the bottom of the Master Jar (see b. below).
3. Screw the Base onto the Master Jar until it is securely connected to the Master Jar (see c. below).
a
b
!
IMPORTANT
Ensure the Base is properly and fully screwed onto the Master Jar, otherwise leakage may occur.
WRONG
4. To disconnect a Base, unscrew it from the Master Jar by turning it in the opposite direction.
9
O
1
2
Control Knob
c
RIGHT
Grinding Jar
(Orange)
Herbs and garlic are best prepared using the Pulse function.
Tip
Nut spreads are best prepared initially using the Pulse function and then setting 2.
Grinding Jar
1.
Connect the Grinding Base to the Grinding Jar:
1.1.
Align the Grinding Base with the Grinding Jar (see a. below).
1.2.
Secure the Grinding Base to the Grinding Jar by screwing it in place (see b. below).
!
The unit will not work unless the Grinding Jar (with Grinding Base attached) is fitted correctly onto
IMPORTANT
the Motor Housing.
a
b
2. Connect the Grinding Jar (with Grinding Base) to the Motor Housing by aligning the arrow on the Grinding
Jar with the "unlock" graphic on the motor housing (see c. below).
3. Turn the Grinding Jar in a clockwise direction, in the direction of the "lock" graphic (see d. below).
!
Never use this attachment for processing liquid or meat.
IMPORTANT
Never fill the Grinding Jar past the MAX line marking.
4. Recommended setting: "P" and setting 2
NOTE: The total operating time should not be longer than 1 minute.
The Pulse setting should not be used for longer thane 3-5 seconds at a time.
c
Suggested Use
• Chopping herbs and garlic
• Grinding nuts
• Grinding coffee
• Making peanut butter
• Milling oats
Grinding Base
Motor Housing
d
22