DockCraft 100 Series Посібник - Сторінка 15

Переглянути онлайн або завантажити pdf Посібник для Човнове спорядження DockCraft 100 Series. DockCraft 100 Series 15 сторінок.

Aluminum / Vinyl Decking

We do not recommend attaching the Bolt On Kayak / Paddle board Surface Mount

Vinyl decking as the Decking material is thin, however supported by 3 vertical members.

Given you choose to mount the Surface (Bolt On) Mount to Aluminum or Vinyl Decking;

it is highly recommended that you install a backer board in the area of the mounting positions.

Option #1

The backer board should be slightly smaller than width between vertical members of decking and at least 6

inches long. The thickness should not extend beyond the height of the decking vertical members.

Option #2

The Backer board should be wider than the width between vertical members of the decking, at least 6

inches long; and have a thickness of ¾ to 1 inch.

When securing the Dock Bolt On Mount; the decking is actually clamped between the Bolt On Mount

and the Backer Board. Use caution as not to over tighten.

Page 15 of 15

directly

to Aluminum /