3M X64W - Digital Projector XGA LCD Посібник з техніки безпеки - Сторінка 12

Переглянути онлайн або завантажити pdf Посібник з техніки безпеки для Проектор 3M X64W - Digital Projector XGA LCD. 3M X64W - Digital Projector XGA LCD 18 сторінок. Digital projector
Також для 3M X64W - Digital Projector XGA LCD: Брошура та технічні характеристики (4 сторінок)

Друкувати сторінку

3M X64W - Digital Projector XGA LCD Посібник з техніки безпеки

For maximum lamp life, do not strike or drop, improperly handle, or scratch the lamp glass.

Also, do not install an old or previously used lamp.

1. Remove lamp access door: Loosen the lamp door screw (marked by arrow) (1) and then slide

the lamp door to the side to remove it. (2)

2. Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws (marked by

arrow) . (3)

All lamp module screws must be loosened. These screws are self-containing screws that

cannot be removed from the lamp module or access door.

3. Remove lamp module: Slowly pick up the lamp module by the handles. (4)

4. Insert lamp module: Carefully insert (4) the new lamp module. Ensure that it is fully seated.

Tighten the lamp module retaining screws (3) to secure the lamp module in place.

Optional Lamp: 78-6969-9917-2 (Contact 3M Customer Service.)

Reset the lamp operation hours. See "Reset Lamp Hours" for details.

(1) Screw

Note

(2) Lamp access door

3M™ Multimedia Projector X64w Product Safety Guide

(3) Screws

(4) Handle