Fleetwood LI-Cocktail Посібник користувача - Сторінка 6
Переглянути онлайн або завантажити pdf Посібник користувача для Блендер Fleetwood LI-Cocktail. Fleetwood LI-Cocktail 6 сторінок. Professional blender
Друкувати сторінку
This equipment is not recommended to process hard mixtures.
Never turn the machine on if it is empty as irreparable damages may occur.
3.2 – Feeding Procedures
The blenders are machines working at high speed (approximately 23.000
rpm).
In order to feed it, proceed as below:
Cut the product in small pieces of approximately 2,0cm. This process helps
in the blending time, specially for frozen products. It is recommended to add a little
water when grinding ice.
Take the lid off Nº 03 (Pic. 01)
Place food product inside the cup Nº 02 (Pic 01) with the machine turned
OFF.
Place the lid back Nº 03 (Pic 01) and start the machine.
3.3
CLEANING
The cup parts are resistant to corrosion, are hygienic and easily cleaned.
Before using them for the first time and after each use, separate them and clean
them with warm water and soap, wipe and dry them well. DO NOT WASH THEM IN
THE DISH WASHER MACHINE.
Revise the parts frequently before assembling them again. If the blades are
jammed or turn badly, DO NOT TURN THE BLENDER ON. Make a revision by
carefully turning the blades into the anti-clock wise direction (the opposite edges
are sharp). The blades must turn easily.
Use only original
SIEMSEN spare parts which are available at your
Technical Assistant. The usage of damaged or not recommend spare parts may
cause serious personal hurts or damages to your blender. Never dip the motor
housing in water or any other liquid.
Disconnect the blender and clean the external part with a wet cloth. The
motor has permanent lubrication and does not need additional lubrication. EVERY
MAINTENANCE WORK
MUST BE DONE BY SIEMSEN AUTHORIZED
TECHNICAL ASSISTANT.
4. General Safety Practices
The following safety instructions are addressed to both the operator of the
machine as well as the person in charge of maintenance.
The machine has to be delivered to the operator in perfect conditions of
use by the Distributor to the user. The user shall operate the machine only after being well
acquainted with the safety procedures described in the present manual. READ THIS
MANUAL WITH ATTENTION.
04
IMPORTANT
4.1 Basic Operation Practices
4.1.1 Dangerous parts
Some parts of the electric devices are connected to high voltage
points. These parts when touched may cause severe electrical shocks or even be
fatal.
Never touch commands such as buttons, switches and knobs with
wet hands , wet clothes and/or shoes. By not following these instructions operator
4.1.2 Warnings
The operator has to be well familiar with the position of ON/OFF
Switch to make sure the Switch is easy to be reached when necessary. Before any
kind of maintenance, physically remove plug from the socket.
Provide space for a comfortable operation thus avoiding accidents.
Water or oil spilled on the floor will turn it slippery and dangerous.
Make sure the floor is clean and dry.
Before giving any manual command (switch, buttons, turn keys or
lever) be sure the command is the correct one. Check this manual for further details if
necessary.
Never use a manual command (switch, buttons, lever) unadvisedly.
If any work is to be made by two or more persons, coordination signs will have to be
given for each operation step. Every step of the operation shall be taken only if the
sign has been made and responded.
4.1.3 Advices
In case of power shortage, immediately turn the machine OFF.
Use recommended or equivalent lubricants, oils or greases.
Avoid mechanical shocks as they may cause failures or malfunction.
Avoid penetration of water, dirt or dust into mechanical or electrical
components of the machine.
DO NOT modify original characteristics of the machine.
DO NOT remove, tear off or maculate any labels stuck on the
machine. If any label has been removed or is no longer legible, contact your nearest
dealer for replacement.
READ CAREFULLY AND WITH ATTENTION THE SAFETY OR
OPERATION INSTRUCTIONS LABELS DISPLAYED ON THE MACHINE, AS WELL
AS THE INSTRUCTION MANUAL AND THE TECHNICAL CHARACTERISTICS
4.2 Safety Procedures and Notes Before Switching Machine ON
IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the
machine ON. Be sure to be familiar with the instructions and that you have
well understood all information contained in this manual. If you have any
question contact your supervisor or your nearest Dealer.
05