Acqiris U1084A Посібник із запуску - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник із запуску для PCI карта Acqiris U1084A. Acqiris U1084A 20 сторінок. Acquisition card, 8-bit, up to 4 gs/s and 1.5 ghz bandwidth

Друкувати сторінку

Product Markings

The CE mark is a registered trademark of the

European Community.

Australian Communication and Media Authority

mark to indicate regulatory compliance as a

registered supplier.

This symbol indicates product compliance with

the Canadian Interference-Causing Equipment

Standard (ICES-001). It also identifies the

product is an Industrial Scientific and Medical

Group 1 Class A product (CISPR 11, Clause 4).

This symbol on an instrument means caution,

risk of danger. You should refer to the operating

instructions located in the user documentation in

all cases where the symbol is marked on the

instrument.

This product complies with the WEEE Directive

marketing requirement. The affixed product

label (above) indicates that you must not discard

this electrical/electronic product in domestic

household waste. Product Category: With

reference to the equipment types in the WEEE

directive Annex 1, this product is classified as

"Monitoring and Control instrumentation"

product. Do not dispose in domestic household

waste. To return unwanted products, contact

your local Acqiris office.

Acqiris U1084A Startup Guide

This symbol indicates the time period during

which no hazardous or toxic substance

elements are expected to leak or deteriorate

during normal use. Forty years is the expected

useful life of the product.

This symbol indicates the instrument is sensitive

to electrostatic discharge (ESD). ESD can

damage the highly sensitive components in your

instrument. ESD damage is most likely to occur

as the module is being installed or when cables

are connected or disconnected. Protect the

circuits from ESD damage by wearing a

grounding strap that provides a low resistance

path to ground. Alternatively, ground yourself to

discharge any built-up static charge by touching

the outer shell of any grounded instrument

chassis before touching the port connectors.

This symbol denotes a hot surface. The side

cover of the module will be hot after use and

should be allowed to cool for several minutes.

Notices