FLENDER FASTEX IC230 Посібник з монтажу та експлуатації - Сторінка 6

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Промислове обладнання FLENDER FASTEX IC230. FLENDER FASTEX IC230 15 сторінок.

Друкувати сторінку

Explanation regarding Machinery Directive 2006/42/EG

The clamping elements described here are components in accordance with the Machinery

Directive and do not require a declaration of incorporation.

Work on the clamping element

Only carry out work on the clamping element when it is not in operation and is not under

load. Secure the drive unit against being switched on accidentally. Attach a notice to the

switch stating clearly that work is being carried out on the clamping element. Ensure that the

entire unit is not under load..

1.3 Intended use

Only use the clamping element according to the conditions specified in the service and

delivery contract and the technical data in the annex. Deviating operating conditions are

considered improper use. The user or owner of the machine or plant is solely liable for any

resulting damage.

When using the clamping element please specifically observe the following:

•

If you have any queries, please contact our customer service (see Service and support

(Page 12)).

1.4 Safety instructions for a clamping element for use in

potentially explosive atmospheres

The assembly supplier is responsible for the guideline-compliant design of the system

clamping element with all associated components. In potentially explosive areas, it must be

ensured that the design torque T

point. The identification and information on the conditions of use can be found in the main

operating instructions of the assembly supplier.

FASTEX IC230 Clamping element 3906de

Compact assembly and operating instructions 05/2022

Do not make any modifications to the clamping element that go beyond the permissible

machining described in these instructions. This also applies to touch protection facilities.

Do not use the clamping element as a torque-limiting safety element.

according to Table 7-1 is not exceeded at any operating