DOD LS300W Посібник з встановлення обладнання - Сторінка 2
Переглянути онлайн або завантажити pdf Посібник з встановлення обладнання для Відеореєстратори DOD LS300W. DOD LS300W 2 сторінки.
Також для DOD LS300W: Посібник користувача (20 сторінок)
Друкувати сторінку
LS300W
Installation and Fixation
Hardware Installation Guide
Product Structure (Including Hotkey)
1
3
5
8
2
4
7
6
9
10
11
12
15
13
16
1.Please insert the memory card into the SD Card Slot with the
specified direction, and then use the bracket to install the device
inside the car.
1.Indicator
9.Video Recording/Camera/Confirm
2.When using the bracket, please choose the position carefully. Do
14
2.Microphone
10.Power switch
not place the device in the position that blocks the driver's sight
3.UP/Zoom in
11.AV Output Port
or affects thel work of the airbags.
12.USB/Vehicle Charger Power
4.DOWN/Zoom out
3.If there is any splotch, fingerprints or other kinds of smudginess
5.MENU/SOS Emergency File Lock
SupplyJack
13.LED lamp
on the windshield, please wipe clean it before installing.
6.MODE Switch
14.Speaker
7.2.7-Inch TFT Display Screen
15.HDMI Output Jack
8.Micro-SD Card Slot
16.Reset key
Power On/Off
Software Operation
Please connect the vehicle cigarette lighter and start the engine, the
Switch On
device will be switched on immediately.
1.Insert the memory card
When the engine stoppedor the vehicle power supply be removed,
2.Connect the car charger into the vehicle
the device will shutdown automatically.
cigarette lighter and the device
Notes
3.Start the vehicle.
4.The device be turned on, and start
1.For the users whose vehicle cigarette lighter keeps power
recording automatically.
supplying after the engine stopped, please unplug the car
charger before leaving the vehicle.
DOD Opening
2.Please use Class 6 or above Micro SD card
Recording image
Recording Settings
After stopped recording, press MENU to enter the recording
settings.
Resolution: Set the recording resolution.
Record Cycle: Set the video length in recording cycle mode, or
toggle off record cycle function.
SD
WDR: Toggle on or off the WDR function.
EV: Set the exposure value.
Motion Detection: Toggle on or off the motion detection recording
function.
Sound Recording: Toggle on or off the sound recording function.
Date Stamp: Toggle on or off the data stamp function.
G-sensor: Set the sensitivity level of the G-sensor file protection .
System Settings
Video Playback
After stopped recording, press MENU twice to enter the system
Video-Play Operation
setup.
1.After stopped recording, press MODE to enter the video-play
Date/Time: Set the system time.
mode.
Auto Power Off: Set the automatic shutdown time after the
2.Press UP or Down to select the desired video to play.
power disconnected or keep the device working until the
3.Press CONFIRM to start playing video.
battery run out.
4. Press CONFIRM again to pause the video.
LCD Off: Set the screen automatic off time, or set it as always on.
Beep: Switch on or off the system beep indicator.
Delete Video
Language: Support multiple languages; you can choose the
1.After stopped recording, press MODE to enter the video-play
language according to your preferences.
mode.
TV Mode: You can toggle between NTSC and PAL when in video
2.Press UP or Down to select the desired video to delete.
output mode.
3.Press MENU, enter the menu to delete the video or delete all.
Frequency: Support 50Hz and 60Hz.
Format: Format the memory card; please backup your data
Play on Computer
before formatting.
It is recommended to play the video by free software VLC PLAYER.
Please go to http://www.videolan.org/vlc/ to download and install
Default Setting: Reset all the settings to the default state.
Version: Check the system version number.
VLC Player.
Recommended PC requirements for 1080P 30fps video playing:
1.intel Core 2 Duo 2.0GHz or above CPU
2.2G or above DDRII RAM
3.Graphic card supports DirectX 10 or above