Etac Molift Air 300 Посібник користувача - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник користувача для Допомога з мобільності Etac Molift Air 300. Etac Molift Air 300 15 сторінок.
Друкувати сторінку
Molift Air
Plan the lifting operation in advance to ensure
that it is as safe and smooth as possible.
Remember to work ergonomically. Assess the
risks and take notes. The assistant is responsible
for the safety of the user.
Molift Air can be used with both 2-point and
4-point suspension for different types of transfers;
sitting, recumbent or ambulating.
Using Slings
It is important that the sling has been tested with
the individual user and for the intended lifting
situation.
Read User Manual for the sling
prior to use.
Do not to use damaged or badly
worn slings.
Slings made by other manufacturers
We recommend only using Molift slings. Etac shall
not be liable for faults or accidents that can occur
when using slings made by other manufacturers.
Lifting and lowering
When moving the user, stand to the side of the
person you are lifting. Make sure that arms and
legs do not obstruct the seat, bed, etc. Keep eye
contact with the user to help them feel safe.
The 4-point suspension must always be positioned
across the user, to prevent the user from uninten-
tionally sliding out of the sling.
Transfer
The suspensions hook design prevents sling to be
inadvertently detached when mounted correct.
1. Check that the sling is correctly fitted around
the user and that the strap loops are correctly
fitted to the suspension hooks.
2. Stretch the sling straps without lifting the
user. Ensure that all four loops of the sling are
securely fastened to avoid the user slipping or
falling.
3. Lift user, and perform transfer.
Angle sensor
The hoist has a directional safety feature that
prevents lifting if angle on lifting strap is to steep.
>30˚
If the hoist doesn't respond to Hand control "up"
button, it might be because lifting strap angle is
to steep, or lifting belt is twisted and sensor is
activated.
11