Etac Molift EvoSling HighBack Посібник користувача - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник користувача для Допомога з мобільності Etac Molift EvoSling HighBack. Etac Molift EvoSling HighBack 12 сторінок.

Друкувати сторінку

Molift EvoSling / www.etac.com

Wash symbols:

Slings can be washed at temperatures

up to 85º C.

Tumble drying, max 45º C.

Do not iron

Do not dryclean

Do not bleach

Periodic Inspection Scope

Periodic inspection is a visual examination of the

sling according to Periodic Inspection Report for

Etac/Molift Slings. This can be found on

www.etac.com.

If the inspection reveals any dan-

ger to safety, the sling must imme-

diately be taken out of service and

be disposed of.

Periodic inspection must be carried out at least

every 6 months. More regular inspection may be

required if the sling is used or washed more often

than is normal. The inspection must be performed

by trained personnel.

When performing a periodic inspection, the

inspector shall fill out the inspection report for

Etac/Molift Slings. The reports should be retained

by the person(s) responsible for inspecting the

sling. If the inspection reveals defects and dam-

ages, the owner shall be notified.

When periodic inspection is completed the inspec-

tor shall mark periodic label showing the date

when periodic inspection is performed.

The periodic inspection label can be found behind

the product label, and this will then indicate when

Maintenance

Cleaning and disinfection

Washing and drying at higher temperatures

wears out the material faster. The sling must be

inspected regularly, preferably prior to each lifting

operation but especially after it has been washed.

Recycling

Refer to "Recycling instructions" for how to

properly dispose of product. This can be found on

www.etac.com.

Periodic Inspection

the next service should be performed (within 6

months from last inspection).

When the sling is used for the first time, the

periodic inspection label should be marked

with month and year. That way it is easier to

know when first periodic inspection should be

performed.

Make sure not to damage or

remove labels when cleaning.