100FIT 50T Інструкція з експлуатації - Сторінка 16
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Бігова доріжка 100FIT 50T. 100FIT 50T 16 сторінок.
How to adjust the running belt?
1) Adjusting the screw on the left side of the belt by Allen Key, turning 1/4 times clockwise to
adjust the rear roller to tight the belt .
2) Repeat step 1 to adjust the right screw. it must be confirmed that the left and the right screw
adjusting at the same distance so that the rear roller can be paralleled to the treadmill frame.
3) Repeat steps 1 and 2 until the running belt does not slip.
4) Note:The running belt can't be adjusted too tightly, which will break the running belt and
increase the pressure of the front and rear rollers, causing problems such as roller bearing
damage and abnormal noise. If you want to reduce the tension of the running belt, turn the wrench
counterclockwise. Note that the left and right sides are rotated at the same distance.
Do not use sandpaper or solvents to clean the treadmill. The controller part of
the treadmill should not be exposed directly to the sun or moisture to avoid
damage. Please check and tight all part accessories of the treadmill frequently.
Damaged parts must be replaced immediately.