Clinton Electronics ce-x109 Інструкція з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кольорова камера Clinton Electronics ce-x109. Clinton Electronics ce-x109 17 сторінок. Built in lens color camera
Друкувати сторінку■ Troubleshooting
If there are problems with the camera operation, check the tables below. If
the problem persists, please contact the agent who supplied the product.
Problems
Nothing appears on the
ㆍCheck the power connection.
screen.
ㆍCheck the video signal line connection.
The video image is not
ㆍMake sure that the lens is clean.
clear.
Clean the lens with a clean lint free cloth or
brush.
ㆍAdjust the contrast control on the monitor.
ㆍMake sure that the screen is not exposed
directly to a bright light.
Re-position the camera if necessary.
The screen is dark.
ㆍAdjust the contrast control of the monitor.
ㆍIf there is an intermediate device, set the75ohm
Hi-z correctly, and also check the connections.
ㆍIf necessary, adjust the brightness level. .
There is a problem with
ㆍCheck if an appropriate power source to
the camera operation.
the camera complies with the manufacturer's
The camera surface is
standard requirement, or if the voltage is
too hot and black stripes
fluctuating. Check for ground loops.
appear on the screen.
High Resolution Built-in Lens Color Camera
Troubleshooting
26
Problems
The MOTION
ㆍCheck if 'MOTION DETECTION' mode is
DETECTION function is
turned on.
not working.
ㆍCheck the setting of the MD AREA.
ㆍCheck the 'WHITE BAL' setting.
Colors are not quite
(Please refer to page 16)
right.
The screen is
ㆍCheck if the camera is facing directly into
flickering.
sunlight or fluorescent light.
ㆍCheck if the AGC menu is set to the OFF
COLOR mode is not
position.
working.
27
Troubleshooting
High Resolution Built-in Lens Color Camera