DOEPFER Dark link Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису DOEPFER Dark link. DOEPFER Dark link 20 сторінок. Usb/midi-to-cv/gate interface
Також для DOEPFER Dark link: Посібник користувача (20 сторінок)

Друкувати сторінку
DOEPFER

3.4. Learn Mode / MIDI Functions

In „learn" mode you will determine how Dark Link will process incoming MIDI data. In addition to this, you
will control the settings of the internal arpeggiator and set the reference tone which will determine the lo-
west key of Dark Link's resp. your connected CV/gate synthesizer's keyboard range.
You can access each function via MIDI program changes. The table below lists all functions. The notes (1)
to (10) explain all functions in detail.
Function
MIDI-Chan / Ref-Note
off
on
off
on
Off
On
Trigger Polarity Normal
Trigger Polarity Inverted
Key-Assign-Mode
Notes:
(1) MIDI channel/reference for CV1=0V
In case of an incoming note event in learn mode, the note number and the channel of the event will be
taken as the new reference tone and MIDI channel of Dark Link. The reference key will be the MIDI note
number that is assigned to 0V CV1 output. In practice you simply enter the learn mode and press the key
on your MIDI keyboard that is supposed to be 0V CV1. MIDI note events below the reference note or higher
than 5 octaves above the reference note will be ignored as the CV1 voltage range of Dark Link
is 0...+5V. The factory default settings of reference key and MIDI channel are note number 36 (C) and
channel 1.
Dark link
MIDI-Message
Counting
#4
#4
#4
Program Change
#7
Program Change
#8
any MIDI-
Controller (except
Bank-Controller
Ctrl#032
Short Explanation
Counting
Note
0
0
1
1
0
2
1
2
3
2
3
3
4
4
5
4
5
6
(4)
5
7
(4)
14
14
15
14
15
16
15
16
17
16
17
18
17
18
18
19
19
20
19
20
20
21
21
22
internal Tempo
21
22
external Tempo
22
11
Functions
Volume
Volume Velocity