DOEPFER Dark link Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Обладнання для запису DOEPFER Dark link. DOEPFER Dark link 20 сторінок. Usb/midi-to-cv/gate interface
Також для DOEPFER Dark link: Посібник користувача (20 сторінок)
Друкувати сторінкуDOEPFER
• CV/Gate:
Connect Dark Link's Gate socket to the gate input of your synthesizer.
Connect Dark Link's CV-1 socket to the pitch controlvoltage input of your synthesizer.
At least these two connections are obligatory to run a voltage controlled synthesizer. The additional
three control voltage provided by Dark Link make your voltage controlled synth "listen" to
pitchbender, velocity and modwheel (resp. a MIDI controller of your choice). Please note that not
all voltage controlled sythesizers are equipped with such inputs to handle these additional
voltages.
Note:
The gate output is not suitable for devices that require a gate voltage higher than +5V! (e.g. ARP
Oddyssey). The gate output is also not suitable for devices that require a so-called switched trigger or
S-trigger. In this case we recommend to order the additional S-Trig cable. Details are available in the FAQ-
section of our website: see "S-Trig conversion".
But Dark Link can be modified for +12V gate voltage or S-Trigger. The modification should not be carried
out by the customer because in this case the warranty is void (it is necessary to interrupt the +5V track and
install a wire to +12V for the +12V gate level). Details concerning the modification are also available on our
website in the FAQ section (in case that customers want to carry out the modification despite the warranty
loss).
The following pictures shows the most importand connections to and from Dark Link:
USB
computer
with
software-sequencer
MIDI-keyboard/sequencer
Dark link
Gate in
CV/Gate-controlled synthesizer
MIDI out
to additional CV-ins
Pitch-CV in
7
Introduction
12V AC
200mA
power-
adaptor
wall-outlet