Cannondale Alloy Road Disc Посібник із швидкого старту - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Велосипед Cannondale Alloy Road Disc. Cannondale Alloy Road Disc 16 сторінок.

Step 3. Install your front wheel.

Unthread and remove the thru-axle from the fork and place it on a

clean surface.

Remove the brake pad spacer. Take care to not pull the front brake

lever without either the pad spacer or disc brake rotor is not installed.

Carefully lift the bike from the box and gently place the fork ends on

the ground.

Locate the disc brake rotor on the front wheel. Orient the wheel so

the rotor is on the left side – the same side as the front brake pads.

SET-UP

STEP 1

STEP 2

STEP 3

STEP 4

PRE-RIDE CHECK