Doepke Dupline DSM 4E Інструкція з експлуатації Посібник з експлуатації - Сторінка 6
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Реле Doepke Dupline DSM 4E. Doepke Dupline DSM 4E 8 сторінок. 4-way relay output with semiconductor inputs
Друкувати сторінку
Doepke
tors has to be ensured. The following table illustrates the connection configuration:
Terminal
1.1/1.5
Switching ch. 1 (L
2.1/2.5
Switching ch. 2 (L
3.1/3.5
Switching ch. 3 (L
4.1/4.5
Switching ch. 4 (L
1.3
Dupline signal conductor -
(Dupline-)
1.4
0 VDC operating voltage
In order to meet the requirements for protective low voltage, VDE0100, Part 410, should
be observed and put into practice during installation.
When connecting please observe that the maximum torque of the terminals of 0.6 Nm
will not be exceeded.
The patented click-and-lock-mechanism allows an easy removal of the unit from the rail
by pushing the housing upwards until it is released.
10. Indicators
Indicator
Green "BUS OK"
LED
4 red LED
11. Technical Data
Dupline
Inputs
Relay outputs
Load capacity (per output)
Load capacity (per output)
6
Description
/L
IN
OUT
/L
IN
OUT
/L
IN
OUT
/L
IN
OUT
Dupline bus:
Off - bus fault / On - bus OK
All-or-nothing relays 1..4:
Off - Relay open / On - Relay closed
Current input
Input channels 4 (semiconductor inputs, channels 5..8)
Output channels 4 (relay output, channels 1..4)
Type Semiconductors
Input voltage
Internal resistance
Type All-or-nothing relay
Voltage
Voltage
Terminal
)
3.2/C5
)
3.6/C6
)
4.2/C7
)
4.6/C8
1.7
1.8
Description
Min.
10 VDC
12 VAC
100 mA
12 VDC
100 mA
3931172/02/05/D
Description
Semiconductor input C5
Semiconductor input C6
Semiconductor input C7
Semiconductor input C8
Dupline signal conductor + (Du-
pline+)
+24 VDC operating voltage
Typ.
10 µA
22 kOhm
Max.
30 VDC
250 VAC
16 A
30 VDC
10 A