DOF Reality M2 Інструкції з налаштування - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкції з налаштування для Аксесуари для відеоігор DOF Reality M2. DOF Reality M2 15 сторінок.
Також для DOF Reality M2: Інструкції з налаштування (14 сторінок)
Друкувати сторінку
3. Balancing
Never ever leave platform powered unattended and powered on when not used. Motors are
constantly doing micro adjustments. When overheated over 70C they can loose the power.
When all is moving and working, and you mounted all your game controllers on the platform it is perfect
time to Balance it. It is
mandatory
lifespan from your platform. If one or few motors getting hotter during use this is a clear indication that that side of
the platform is overloaded and you need to move the weight away from it. Under no circumstances You should let
motors getting hot! Overheated magnets inside the motor loose power forever and it leads to substantial motor
power decrease
Balancing with the App:
0) If your platform was delivered on or before 2020, we will need to update your firmware with "firmware
updater.exe" . it is inside
1) you close SRS and disable PC Bluetooth before starting it.
Unzip and run balancing app for your model from
2) click Connect and when connected you should see two ports in the boxes under the buttons
3) get inside your seat and click Balance . your platform will move up and down. During motions app might be
unresponsive.
4) you will see recommendations on the screen WHERE to move weight and the number telling how much to
move. the number is not in pounds or kilos, but rather relative units. Values under 10% considered acceptable.
5) you move your body only to the mentioned direction. temporary , just to see the results. It might be
inconvenient to stay this way , but we just testing it now. and click Balance again .
6) platform will move and give you new results ON THE TOP of the old ones.
7) when you get perfect or almost perfect balancing position move the seat and other objects on your platform
and retest it with your normal sitting position until your get balancing done. Values under 10% considered
acceptable
We strongly advise against adding weight in this fashion, as this adds unnecessary weight for the motors to lift
while changing directions. The best counter-balance is your own weight, which is governed by the seat position. If
one or multiple motors are overheating (or even getting hot) during use this is might mean that one side of the
platform is overloaded and you need to move some structural weight away from that side. The motors should
NEVER be hot! Overheated magnets inside the motor loose power forever and it leads to substantial motor
power decrease.
step. This is a very important and crucial steep to get the best performance and
https://dofreality.com/tools.zip
2
Setup Instructions DOF Reality M2
https://dofreality.com/tools.zip