DOGA GX 35/ESD Інструкція з експлуатації - Сторінка 4

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Електроінструмент DOGA GX 35/ESD. DOGA GX 35/ESD 20 сторінок.

DOGA BRUSHLESS ELECTRIC SCREWDRIVERS / GX SERIE

WARNING

1. Keep the working area clean.

Avoid wearing the harmful clothes to the electric shock.

2. Don't touch the electrical parts after opening the cover. It may be dangerous for the electric shock.

3. Always keep the power off during contact the electrical parts.

4. Before the power on, always check the electric concerned.

5. Be sure that the any live parts should not be touched to the steel parts.

6. Use the rated power voltage for each models

7. Be careful the earth line not to touch the electric parts or lead on power.

8. Never use the non-specified parts.

9. Never lubricate aerosol oil the electrical part including the motor

10. The wires should not be damaged by sharp edge, soldering iron or any pulling force when close the cover.

11. All solder points should be protected by the shrink cable

12. Be aware that the motor can be damaged by the impact or hit.